Installing Propeller - Yamaha F25 Owner's Manual
Hide thumbs
Also See for F25:
- Owner's manual (122 pages) ,
- Service manual (43 pages) ,
- User manual (25 pages)
Table of Contents
Advertisement
using a pair of pliers.
2.
Remove the propeller nut, washer, and
spacer (if equipped). WARNING! Do
not use your hand to hold the propel-
ler when loosening the propeller nut.
[EWM01890]
1. Cotter pin
2. Propeller nut
3. Washer
4. Spacer
5. Propeller
6. Thrust washer
1. Cotter pin
2. Propeller nut
3. Washer
4. Propeller
5. Thrust washer
3.
Remove
the
equipped), and thrust washer.
1
3
4
6
5
ZMU06564
1
3
4
5
ZMU06603
propeller,
washer
EMU30672
Installing propeller
EMU29233
Spline models
ECM00500
NOTICE
Be sure to use a new cotter pin and bend
the ends over securely. Otherwise the
propeller could come off during opera-
tion and be lost.
1.
Apply Yamaha marine grease or a cor-
2
rosion resistant grease to the propeller
shaft.
2.
Install the spacer (if equipped), thrust
washer, washer (if equipped), and pro-
peller on the propeller shaft. NOTICE:
Be sure to install the thrust washer
before installing the propeller, other-
wise the lower case and propeller
boss could be damaged.
3.
Install the spacer (if equipped) and the
washer. Tighten the propeller nut to the
specified torque.
Propeller nut tightening torque:
35.0 Nm (3.57 kgf-m, 25.8 ft-lb)
4.
Align the propeller nut with the propeller
shaft hole. Insert a new cotter pin in the
2
hole and bend the cotter pin ends.
NOTICE: Do not reuse the cotter pin
installed. Otherwise the propeller can
come off during operation.
(if
Maintenance
[ECM01880]
[ECM01890]
83
- Quick Links:
- Engine Oil Requirements
- Changing Engine Oil
Hide quick links:
Advertisement
Table of Contents
