Procedure For Tilting Up (Power Trim And Tilt Models) - Yamaha F25 Owner's Manual
Hide thumbs
Also See for F25:
- Owner's manual (122 pages) ,
- Service manual (43 pages) ,
- User manual (25 pages)
Table of Contents
Advertisement
2.
Disconnect the fuel line from the out-
board motor.
3.
Place the tilt lock lever (if equipped) in
the release/up position.
4.
Pull up the shallow water lever (if
equipped).
5.
Hold the rear of the top cowling with one
hand and tilt the engine up fully.
6.
Push the tilt support knob into the clamp
bracket. Or the tilt support bar will turn to
N
ZMU06521
ZMU06533
ZMU06539
the
lock
NOTICE: Do not use the tilt support
lever or knob when trailering the
boat. The outboard motor could
shake loose from the tilt support and
fall. If the motor cannot be trailered in
the normal running position, use an
additional support device to secure it
in the tilt position. For more detailed
information, see page 69.
EMU32723
Procedure for tilting up (power trim
and tilt models)
1.
Place the remote control lever / gear
shift lever in neutral.
N
Operation
position
automatically.
[ECM01641]
ZMU06503
ZMU03196
63
- Quick Links:
- Engine Oil Requirements
- Changing Engine Oil
Hide quick links:
Advertisement
Table of Contents
