Components
dle out until resistance is felt. From that posi-
tion, then pull the handle straight out quickly
to crank the engine.
EMU26080
Starter button
To start the engine with the electric starter,
push the starter button.
EMU26090
Main switch
The main switch controls the ignition system;
its operation is described below.
"
" (off)
G
With the main switch in the "
tion, the electrical circuits are off, and the key
can be removed.
"
" (on)
G
With the main switch in the "
tion, the electrical circuits are on, and the key
cannot be removed.
"
" (start)
G
With the main switch in the "
30
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the "
ZMU06523
EMU31432
Steering friction adjuster
A friction device provides adjustable resis-
ZMU06526
tance to the steering mechanism, and can be
set according to operator preference. An ad-
juster lever is located on the bottom of the
tiller handle bracket.
To increase resistance, turn the lever to the
port side "A".
To decrease resistance, turn the lever to the
" (off) posi-
starboard side "B".
EWM00040
Do not overtighten the friction adjuster. If
" (on) posi-
there is too much resistance, it could be
difficult to steer, which could result in an
accident.
" (start) po-
" (on) position.
WARNING