Advertisement
Loop
to allow
full turn
of antenna
. Mount antenna
as close to rotor as
possible.
Use no more than 3 feet
of mast in top of drive unit,,
Do not mount
citizens
band base
station
antennas
on top of a standard
mast mount
drive unit.
Mast
support
may become
overloaded
in high winds.
STEP
3 -
Connect
rotator
cable
to drive
unit
terminal
board
following
the
sketch
at the
right.
Caution:
When
using
jacketed
cable,
be sure
jacket
of cable
passes
thru
the
grommet
to avoid
moisture
collecting
in the cable,,
Red W_re
to #3
Terminal
Connections
rerm|nals
GrommeL
Caution
- Make
sure bare
connectors
do not touch.
It is suggested
that the screws
and
bare
conductors
be painted
with nail polish
after cable
is connected.
To avoid
moisture
collecting
in the cable
be sure jacket
of cable passes
thru the grommet.
STEP
4 - Attach
rotator
cable
and
antenna
cable
securely
to mast
or tower,
and
pass
through
building
to TV or FM set.
Note: See Step
2 of the Important
Safeguards
section
regarding
grounding
of the control
cable
and
lead-in
cable for lightning
protection.
Advertisement
