hit counter script
Pioneer DDJ-ERGO-V Service Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Controller
  5. DDJ-ERGO-v
  6. Service manual

Pioneer DDJ-ERGO-V Service Manual

Dj controller
Hide thumbs Also See for DDJ-ERGO-V:
Table of Contents

Advertisement

Quick Links

Download this manual
DJ Controller
DDJ-ERGO-V
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
Type
DDJ-ERGO-V
XJ5
This product is a model for destinations worldwide (except China and Korea).
It operates only on USB-bus power. No need to use an AC adapter.
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION
Power Requirement
DC 5 V
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
2011
DDJ-ERGO-V
K-IZV NOV.
ORDER NO.
RRV4269
Remarks
2011 Printed in Japan

Advertisement

Table of Contents
loading

Related Manuals for Pioneer DDJ-ERGO-V

Summary of Contents for Pioneer DDJ-ERGO-V

  • Page 1 PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936...

  • Page 2: Safety Information

    WARNING This product may contain a chemical known to the State of California to cause cancer, or birth defects or other reproductive harm. Health & Safety Code Section 25249.6 - Proposition 65 DDJ-ERGO-V...

  • Page 3: Table Of Contents

    11.1 JACK ASSY ................................78 11.2 IFPW, HPLC and HPJK ASSYS ..........................82 11.3 CDJ1 and CRFD ASSYS............................86 11.4 CDJ2 ASSY ................................90 11.5 JOG1, JOG2, TCH1 and TCH2 ASSYS ........................94 12. PCB PARTS LIST ................................95 DDJ-ERGO-V...

  • Page 4: Service Precautions

    No program has been stored in the EEPROM (IC104) on the IFPW Assy (blank ROM) when it is supplied as a part for service. After the EEPROM is replaced, be sure to copy the program for the USB controller to it. For details, see “8.2 HOW TO PROGRAM COPY FOR USB CONTROLLER.” DDJ-ERGO-V...

  • Page 5: Specifications

    (DXX2685) • Driver software/operating instructions CD-ROM (DRU1001) • Read Before Use (Important) (DRH1122) • Quick Start Guide (DRH1123) • Hardware Diagram for Virtual DJ (Table of Supported Functions) (DRH1124) • Warranty card • Service network list (for Japanese customers) DDJ-ERGO-V...

  • Page 6: Basic Items For Service

    Volume fluctuating Sound interrupted 3.2 JIGS LIST Jigs List Jig Name Part No. Purpose of use / Remarks USB cable GGP1193 for PC connection Lubricants and Glues List Name Part No. Remarks Lubricating oil GYA1001 Refer to “9.4 JOG SECTION”. DDJ-ERGO-V...

  • Page 7: Pcb Locations

    2..CDJ2 ASSY DWX3303 2..TCH1 ASSY DWS1437 2..JACK ASSY DWX3304 2..JOG2 ASSY DWS1438 2..CRFD ASSY DWX3305 2..TCH2 ASSY DWS1439 2..HPJK ASSY DWX3306 2..CDJ1 ASSY DWX3302 2..HLD3 ASSY DWX3311 2..HLD1 ASSY DWX3309 2..HPLC ASSY DWX3324 2..HLD2 ASSY DWX3310 1..IFPW ASSY DWX3301 DDJ-ERGO-V...

  • Page 8: Block Diagram

    D C S 1 1 1 1 - A VERTICAL VERTICAL JA2903 DSH1025-A LENGTH=70mm JA2902 DKN1622-A DKN1622-A JA2901 AKB7181-A AKB7181-A CONTACTSIDE CONTACTSIDE PITCH=1mm DKN1614-A V R 2 9 0 1 D C S 1 1 1 5 - A SAME FACE FFC 27P DDJ-ERGO-V...
  • Page 9 PARALLEL JUMPER WIRE 1/3- IFPW ASSY (DWX3301) G N D 1 G N D 3 G N D 2 G N D 4 KN101 S101 J A 1 0 2 VNE1948-A DSH1025-A D K N 1 2 3 7 - A DDJ-ERGO-V...

  • Page 10: Overall Block Diagram

    MIC_AUXIN_SEL IC2903 MIC_AUXIN_R IC503 MUTE CIRCUIT IC2904 MIC_AUXIN_L C N2901 CN101 IC2901 IC2902 MUTE CIRCUIT VR2901 S2901 VR2902 JA2902 JA2904 JA2905 JA2903 JA2901 MASTER1 OUT MASTER2 OUT MIC IN MIC IN VOL MIC/AUX SELECT AUX IN VOL AUX IN DDJ-ERGO-V...
  • Page 11 HP Data MIC/AUX Data IC102 LRCK USB uCom MCLK TUSB3200A IC303 IC305 Q306 IC304 IC302 IC301 IC503 - 6V XOUT X101 6MHz Xtal P_SW IC307 POWER VBUS VBUS DETECT DETECT DETECT CIRCUIT CIRCUIT JA102 S101 IFPW ASSY POWER SW DDJ-ERGO-V...

  • Page 12: Power Block Diagram

    OPAMP (MASTER1) AMP (HP) NJM4580MD V- 6_J BH3547F IC506, 507 IC504 V+5_HP_OUT V+5_HP V-6_J V+7_J _OUT V+5_HP V-6_J V+7_J _OUT JACK ASSY HPLC ASSY OPAMP (for MIC/AUX) IC2901, 2902 Charge Capacitor OPAMP (for MIC/AUX) IC2904 MASTER1(TRS) MASTER2 AUX IN DDJ-ERGO-V...
  • Page 13 TCH1/2 ASSY _UCOM _LED DAC (MASTER) AK4387ET IC501 V+3R3 V+3R3 _UCOM _LED DAC (HP) CDJ2 ASSY AK4387ET IC502 JOG1/2 ASSY AMP (HP) BH3547F IC504 TEMPO SLIDER DCV1011 Photointerrupter 5_HP_OUT V+3R3 SEDS-7573 _UCOM PC1701/PC2701 Photointerrupter V+3R3 GP1S094HCZ0F _UCOM PC1801/PC2801 TCH1/2 ASSY DDJ-ERGO-V...

  • Page 14: Diagnosis

    Abnormal stopping of the TUSB3200A LED indication for USB controller error CRC check of the main flash CRC error? (FLASH NG?) Waiting for a recovery/updating request LED indication for flash ROM error Note: Start the updating program on the PC. DDJ-ERGO-V...
  • Page 15 • Power failure monitoring/Power voltage monitoring • Power ON/OFF SW monitoring • MIC/AUX switching • Detection of change in operating elements • DAC control • USB transmission (transmission of operating element data) • USB reception (reception and indication of display data) DDJ-ERGO-V...

  • Page 16: Troubleshooting

    4.3 POWER BLOCK V+3R3_UCOM CDJ1 Assy Check the voltage at Pin 1 (CONT) of the V+3R3_UCOM regulator is low, the S101 power DIAGRAM regulator on the V+3R3_UCOM regulator. switch or Q301, or their peripheral circuits may IFPW Assy be defective. DDJ-ERGO-V...
  • Page 17 Check the power line and the parts, such as coils 10.13 WAVEFORMS (beads), resistors, and capacitors. If no problem was found with the parts, power line, and conduction between the power supply and GND, the USB Controller (IC102) may be defective. DDJ-ERGO-V...
  • Page 18 LED. 10.13 WAVEFORMS $%&' Defective transistor CDJ1 Assy Check the transistors for LED drive. If the signal waveform is abnormal, the transistor 10. SCHEMATIC for LED drive CDJ2 Assy may be defective. DIAGRAM 10.13 WAVEFORMS $%&' DDJ-ERGO-V...
  • Page 19 (IC1201, IC1202, IC2201) or the SW_AD_A/B switching-signal line may be defective. Defective MAIN CDJ1 Assy If the symptom persists after the above The MAIN UCOM (IC1002) may be defective. [7] Basic Operation UCOM (IC1002) corrections. Check of the MAIN UCOM DDJ-ERGO-V...
  • Page 20 During the above adjustment, if the lower-limit 8.4 JOG DIAL adjustment position of the Adjust Plate is reached, ROTATION LOAD shavings from the worn-out washer may have ADJUSTMENT increased the friction. Replace the washer, load gear, and cam plate with new ones, then reassemble. DDJ-ERGO-V...
  • Page 21 The audio signal may be interrupted by a loose 10.13 WAVEFORMS Loose connection IFPW Assy interrupted on the line from CN101 to the connection of the signal line or by a defective resistor, /defective parts jacks (JA2903). capacitor, transistor, or jacks. DDJ-ERGO-V...
  • Page 22 Identify the point where the audio signal is The audio signal may be interrupted by a loose ——— /defective parts interrupted on the line from JH1901 to the connection of the signal line or by a defective jacks (JA1901/JA1902). resistor, capacitor, or jack. DDJ-ERGO-V...
  • Page 23 AUX/MIC selector (S2901) is selector is set to MIC. switched. If the switching control signal is not normal, the MIC_AUXIN_SEL or MIC_AUXIN_SW signal line may be loose, or the resistor, transistor, MAIN UCOM (IC1002), or switch (S2901) may be defective. DDJ-ERGO-V...
  • Page 24 If nothing is wrong with these parts, the DAC for MASTER OUT (IC501) or for HP (IC502) or the MAIN UCOM (IC1002) may be defective. DDJ-ERGO-V...

  • Page 25: Voltage Monitoring

    5 If the voltage of any power IC is abnormal, the circuit that uses that power or the power IC itself may be defective. 6 Repair the defective part then check that the power and voltage of the repaired part becomes normal. 7 Return R337 to its original position on the IFPW Assy. Note: This step will enable power monitoring. DDJ-ERGO-V...

  • Page 26: About Power-Saving Mode

    2 Check if headphones with impedance outside the range of the guaranteed specifications (impedance 32 ohms or less) are connected. 3 Check if a monaural plug is connected to the Headphones connector. 4 The connected PC may not be able to supply enough USB power (may not meet USB standards). DDJ-ERGO-V...

  • Page 27: Operation Check Methods, Using Virtual Dj

    If the OS of the PC is Windows, the driver software for outputting audio from the PC must be installed beforehand. The requirements of a PC on which VIRTUAL DJ LE can be installed are as shown below. [Connection] DDJ-ERGO-V...
  • Page 28 The Settings window is displayed. Select the Sound Setup tab and set the following items in the order described below. 1 [Inputs]: Select MICROPHONE. 2 [Sound card]: Select Pioneer DDJ ASIO. Check the "Ultra-latency". 3 [Outputs]: Select [Master: Chan 1&2/Headphones: Chan 3&4].
  • Page 29 [Operation elements to use at the operation check] Rotary selector MASTER VOL LOAD LOAD GAIN GAIN AUX/MIC VOL HEADPHONE SHIFT Channel fader DDJ-ERGO-V...

  • Page 30: Service Mode

    While simultaneously holding the DECK C and FX 1 buttons on the Deck A/C side pressed, set the Power switch of the unit to ON. The VINYL mode ON/OFF and Normal/Active mode are reset to the initial settings. For details, see “6.4 FACTORY RESET MODE.” DDJ-ERGO-V...

  • Page 31: Firmware Version Confirmation Methods

    How to Confirm the Firmware Version on the Connected PC 1. Click on Start then select Programs, Pioneer, DDJ, then DDJ Version Display Utility, to start up the utility. • This method can be used only with Windows, and with Mac OS the firmware version cannot be confirmed in this way.
  • Page 32 DECK B/D VINYL LED on the DECK B/D side unlit Pulse Mode: Active Blue LEDs on both decks lit Illumination mode JOG dial Pulse Mode: Normal Blue LEDs on both decks unlit * For details, see “6.4 FACTORY RESET MODE.” DDJ-ERGO-V...

  • Page 33: Service Mode

    SAMPLER VOL PUSH ENCODER VINYL SHIFT BUTTON LOOP OUT KEY LOCK BUTTON KEY LOCK BUTTON PLAY/PAUSE BUTTON PLAY/PAUSE TEMPO SLIDE VOLUME JOG LED ROTATION A JOG ROTATION DIAL JOG LED ROTATION A JOG TOUCH DIAL JOG LED ALL ON DDJ-ERGO-V...
  • Page 34 FX 2 B/D HEADPHONE CUE A/C BUTTON HEADPHONE CUE A/C HEADPHONE CUE B/D BUTTON HEADPHONE CUE B/D FADER A/C SLIDE VOLUME JOG LED ROTATION A FADER B/D SLIDE VOLUME JOG LED ROTATION B CROSS FADER SLIDE VOLUME JOG LED ROTATION A/B DDJ-ERGO-V...
  • Page 35 At the minimum level, LEDs 24, 1, and 2 are lit, with LED 1 brighter than other two. The lighting LEDs shift as the level is increased, and LEDs 15, 16, and 17 are lit at the maximum level. DDJ-ERGO-V...

  • Page 36: Factory Reset Mode

    1) Checking VINYL ON/OFF Check the same as described in 1) of a). 2) Checking of Normal/Active Mode Check that blue LEDs on the JOG dial are lit (Active mode). (LED indication is the same as described in 2) of a). DDJ-ERGO-V...

  • Page 37: Power-Saving Mode

    Blinks in a cycle of 1 seconds. 6.7 ABOUT THE DEVICE Device Name Function Part No. Reference No. Assy MAIN UCOM Main control, all function / LED control PEQ033A8 IC1002 CDJ1 Assy USB Controller USB control, Audio control TUSB3200A IC102 IFPW Assy DDJ-ERGO-V...

  • Page 38: Disassembly

    (DAA1262) ×6 (DAA1273) ×4 (DAA1284) ×17 White White Black Black Black Black Knob/SLD Slider Knob 1 Slider Knob 2 Stopper/SLD (DNK6008) ×2 (DAC2684) ×3 (DAC2685) ×3 (DNK6009) ×3 White Slider Knob 2 Black White Slider Knob 1 Black Stopper/SLD White DDJ-ERGO-V...
  • Page 39 Disassembly [1] Chassis Section (1) Reverse the product. (2) Remove the 10 screws. (BPZ30P080FNI) ×10 (3) Remove the two screws. (PBZ30P080FTC) ×2 • Bottom view (4) Remove the chassis section. Chassis section Diagnosis Control panel section DDJ-ERGO-V...
  • Page 40 (4) Remove the two screws. (BBZ30P060FTC) IFPW Assy (5) Remove the two screws. (BPZ30P080FNI) ×3 ×4 (6) Remove the one screw. (DBA1340) (7) Remove the seven screws and remove the JACK and IFPW Assemblies. (BBZ30P060FTC) Screw tightening order Stay/PCB Stay/PCB DDJ-ERGO-V...
  • Page 41 Slider knob 2 Tweezers Protective material *: During reassembly, fully push down Slider knob 2 until it is dented into Slider knob 1. 4 Remove the slider knob 1. 5 Remove the stopper/SLD. Slider knob 1 Stopper/SLD DDJ-ERGO-V...
  • Page 42 ×10 (1) Remove the 10 nuts and 10 washers. (2) Remove the two screws. (IMZ30P040FTC) (3) Remove the four screws. (PMH20P040FTC) (4) Remove the stay/VR. ×4 ×2 Stay/VR Screw tightening order The other screws are random order. CDJ1 Assy DDJ-ERGO-V...

  • Page 43: Each Setting And Adjustment

    3. After making sure that the FUNCTION LED is unlit, set the Power switch of the unit to OFF. LOOP OUT 1 button : S1227 VINYL 1 button : S1208 FUNCTION LED : D1203 Note: If copying fails, the FUNCTION LED will flash at intervals of 0.25 sec. DDJ-ERGO-V...

  • Page 44: How To Firmware Update

    Note: xxx is version number. If it is Ver1.00, it is DDJERGOv_100.zip/DDJERGOv_100.dmg. CAUTION: When you update, please terminate all DJ applications, such as VIRTUAL DJ. Starting/Selection of a language (English is chosen.) Check of a version (Click a [START]) End. (Click a [OK]) Controller is re-started automatically. DDJ-ERGO-V...

  • Page 45: Jog Dial Rotation Load Adjustment

    The 5th time or subsequent measurement can be performed, but the number of times of measurement is not indicated with the LEDs. The mean value of the results of all the measurements is calculated, and its result will be indicated with the LEDs. Adjust plate Fig. 1 DDJ-ERGO-V...

  • Page 46: Exploded Views And Parts List

    Screws adjacent to b mark on product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions, apply as you think it appropriate.) 9.1 PACKING SECTION Front DDJ-ERGO-V...
  • Page 47 NSP 12 Label/L K DRW2484 NSP 13 Vinyl Bag AHG7031 NSP 14 Polyethylene Bag AHG7117 15 Pad/A DHA1878 16 Pad/B DHA1879 17 Pad/ACC DHA1880 18 Packing Case/V DHG3079 19 Sheet RHX1006 20 Plastic Handle (PE) VEC2292 21 Spacer (PE) VEC2293 DDJ-ERGO-V...

  • Page 48: Exterior Secion

    9.2 EXTERIOR SECION Refer to "9.3 CONTROL PANEL SECTION". DDJ-ERGO-V...
  • Page 49 25 Stopper/SLD DNK6009 NSP 26 Label/V DRW2492 27 • • • • • 28 • • • • • 29 Nut (M12) NKX2FNI 30 Screw BBZ30P060FTC 31 Screw BPZ30P080FNI 32 Screw (M3x5) DBA1340 33 Screw PBZ30P080FTC 34 Screw PMB30P080FTB DDJ-ERGO-V...

  • Page 50: Control Panel Section

    9.3 CONTROL PANEL SECTION • Bottom view Refer to Washer (Accessories of VR) "9.4 JOG SECTION". Nut (Accessories of VR) Refer to "9.4 JOG SECTION". DDJ-ERGO-V...
  • Page 51 DNK5989 28 Control Panel DNK6000 29 Play Button Assy DXA2252 30 Cord Clamper (Steel) RNH-184 31 • • • • • 32 • • • • • 33 Screw BPZ30P080FNI 34 Screw BPZ30P100FTB 35 Screw IMZ30P040FTC 36 Screw PMH20P040FTC DDJ-ERGO-V...

  • Page 52: Jog Section

    9.4 JOG SECTION Lubricating oil (GYA1001) CDJ1 CN1002 CDJ2 CN2002 CDJ1 JH1001 CDJ2 JH2001 Encoder arm Hook Arm spring Hook Lubricating oil (GYA1001) Bottom view DDJ-ERGO-V...
  • Page 53 DNK5945 25 Roller B Assy DXB1877 26 JOG Holder Assy DXB2002 27 Binder ZCA-SKB90BK 28 • • • • • 29 • • • • • 30 Washer WA41D070D025 31 Washer WT32D080D050 32 Screw BPZ20P060FTC 33 Screw (FE) DBA1265 DDJ-ERGO-V...

  • Page 54: Schematic Diagram

    1 0 0 u / 1 6 M I C _ A U X I N _ L MIC_AUXIN_L V K N 1 8 4 2 - A V-6_J GND_AO GND_AI GND_AO GND_AI J P 2 9 0 1 DDJ-ERGO-V...
  • Page 55 R 2 9 6 2 GND_AO GND_F2 GND_AO GND_AO NOTES is No Mount RS1/10SR***J RS1/10SR****D *CAPACITORS Indicated in Capacity/Voltage(V) RS1/4SA***J unless otherwise noted. u F , p *RESISTORS CKSRYB***K Indicated in 5% tolerance CCSRCH***J unless otherwise noted. k CEAT*** CEAL*** DDJ-ERGO-V...

  • Page 56: Ifpw Assy (1/3) And Hplc Assy

    V+3R3_UCOM C N 1 0 6 GND_D CN1004 NOTES GND_AI GND_AO is No Mount RS1/10SR***J RS1/4SA***J *CAPACITORS Indicated in Capacity/Voltage(V) RS1/10SR****F unless otherwise noted. u F , p CKSRYB***K *RESISTORS Indicated in 5% tolerance CCSRCH***J unless otherwise noted. k DDJ-ERGO-V...
  • Page 57 R 1 4 1 USB_BUSY 4 7 k 1000p P1.4/MCUAD4 TEST 1 0 0 C 1 3 9 EXTEN P1.3/MCUAD3 0.1u C 1 1 3 RSTO DVDDS1 GND_D GND_D USB_REQ USB_XRST USB_BUS R 1 2 3 1 0 0 GND_D DDJ-ERGO-V...

  • Page 58: Ifpw Assy (2/3)

    1:4F;2G;4G 1/3,3/3 1/3, 1/3,3/3 P W R _ O N Q 3 1 4 P W R _ O N Q 3 0 2 L T C 1 2 4 E U B 1:4F;4G;6F;3:5D 1:4F;2G;6F;3:5D GND_D GND_LED GND_D GND_D DDJ-ERGO-V...
  • Page 59 No Mount P W R _ O N 1:4F;2G;4G;3:5D RS1/10SR***J RS1/4SA***J 1/3,3/3 RS1/8SQ***J RS1/10SR****D *CAPACITORS GND_D Indicated in Capacity/Voltage(V) RS1/10SR****F unless otherwise noted. u F , p CKSRYB***K *RESISTORS Indicated in 5% tolerance CCSRCH***J unless otherwise noted. k CEVW*** DDJ-ERGO-V...

  • Page 60: Ifpw Assy (3/3)

    1 0 0 u / 1 6 C D T I V+5_A AK4387ET R 5 1 3 GND_AO Q 5 1 1 L T C 1 2 4 E U B GND_AO GND_AO GND_D DAC_CS GND_AO V-6_J AUDIO_CONT 1:5D;1D GND_AO DDJ-ERGO-V...
  • Page 61 C 5 5 7 RS1/8SQ***J C C H 1 5 6 5 - A 100u RS1/10SR****D CKSRYB***K GND_AO V-6_J GND_AO *CAPACITORS CCSRCH***J Indicated in Capacity/Voltage(V) unless otherwise noted. u F , p CEVW*** *RESISTORS Indicated in 5% tolerance unless otherwise noted. k DDJ-ERGO-V...

  • Page 62: Cdj1 Assy (1/2)

    (DBG_RXD) NOTES D B G _ C L K 2D;2:7G D B G _ B U S Y *CAPACITORS Indicated in Capacity/Voltage(V) GND_D unless otherwise noted. u F , p *RESISTORS Indicated in 5% tolerance unless otherwise noted. k DDJ-ERGO-V...
  • Page 63 CN1801/CN2801 V+3R3_UCOM GND_D W I T H J U M P E R W I R E GND_AD D 2 0 P D Y 0 3 1 0 E GND_D NOTES is No Mount RS1/10SR***J RS1/4SA***J CKSRYB***K CCSRCH***J CEAT*** DDJ-ERGO-V...

  • Page 64: Cdj1 Assy (2/2)

    G R I D _ 6 G R I D _ 0 NOTES GND_LED GND_LED GND_LED GND_LED GND_D is No Mount GND_D GND_D GND_D R 1 2 7 3 L E D _ 1 3 RS1/10SR***J 1:4B RS1/10SR**** CKSRYB***K GND_LED DDJ-ERGO-V...
  • Page 65 C 1 2 3 3 N M GND_AD C 1 2 2 1 is No Mount DOWN GND_AD *CAPACITORS RS1/10SR***J Indicated in Capacity/Voltage(V) unless otherwise noted. u F , p RS1/10SR****D *RESISTORS Indicated in 5% tolerance CKSRYB***K unless otherwise noted. k DDJ-ERGO-V...

  • Page 66: Hpjk And Crfd Assys

    D C V 1 0 2 3 - A V+3R3_AD R 2 6 0 1 AD_CRSFD 2 2 0 JH1002 GND_AD 3.3V C N 2 6 0 1 5 2 1 5 1 - 0 3 1 0 GND_AD NOTES is No Mount RS1/10SR***J CKSRYB***K GND_F2 GND_F1 DDJ-ERGO-V...

  • Page 67: Cdj2 Assy (1/2)

    5 1 0 4 8 - 0 3 0 0 unless otherwise noted. k W I T H J U M P E R W I R E D 2 0 P D Y 0 3 1 0 E NOTES is No Mount RS1/10SR***J CKSRYB***K CEAT*** DDJ-ERGO-V...

  • Page 68: Cdj2 Assy (2/2)

    G R I D _ 4 G R I D _ 2 G R I D _ 0 GND_LED GND_LED GND_LED R 2 2 8 0 GND_LED GND_D GND_D GND_D GND_D L E D _ 1 4 R 2 2 5 2 1:2C GND_LED DDJ-ERGO-V...
  • Page 69 NOTES RED (Diffused Type) SLI-343U8R(HJK)-TS is No Mount *CAPACITORS Indicated in Capacity/Voltage(V) RS1/10SR***J unless otherwise noted. u F , p AMBER (Diffused Type) SLI-343Y8Y(KLM)-TS RS1/10SR****D *RESISTORS Indicated in 5% tolerance CKSRYB***K unless otherwise noted. k BLUE (Clear Type) SLR343BC4T(JK)-TS DDJ-ERGO-V...

  • Page 70: Jog1 And Jog2 Assys

    JOG_DIAL2_0 G N D 1 V+3R3_UCOM G N D CN2002 SEDS-7573 GND_D GND_D *CAPACITORS NOTES Indicated in Capacity/Voltage(V) unless otherwise noted. u F , p is No Mount *RESISTORS Indicated in 5% tolerance RS1/10SR***J unless otherwise noted. k CKSRYB***K DDJ-ERGO-V...

  • Page 71: Tch1 And Tch2 Assys

    JH1001 Q 2 8 0 2 R2808 V+3R3_UCOM JOG_TCH1/2 JH2001 GND_D GP1S094HCZ0F GND_D *CAPACITORS NOTES Indicated in Capacity/Voltage(V) unless otherwise noted. u F , p is No Mount *RESISTORS Indicated in 5% tolerance RS1/10SR***J unless otherwise noted. k CKSRYB***K DDJ-ERGO-V...

  • Page 72: Voltages

    IFPW ASSY, CDJ1 ASSY MIC: 0V MIC_AUXIN_SEL AUX IN: 2.1 to 2.4 V JACK ASSY, MIC: 6.6 to 7.4 V IFPW ASSY, CDJ1 ASSY JOG_TCH1/2 TOUCH: 3.2 to 3.4 V CDJ1 ASSY, CDJ2 ASSY RELEASE: 0 V TCH1 ASSY, TCH2 ASSY DDJ-ERGO-V...

  • Page 73: Waveforms

    V: 2.0 V/div. H: 100 mS/div. V: 2.0 V/div. H: 1.0 S/div. V: 5.0 V/div. H: 40 mS/div. TP/IC301 - pin 4 (V+5_A) TP/CN102 - pin 33 (FAULT_DET2) V: 2.0 V/div. H: 100 mS/div. V: 5.0 V/div. H: 40 mS/div. DDJ-ERGO-V...
  • Page 74 V: 2.0 V/div. H: 400 μS/div. V: 2.0 V/div. H: 2.0 S/div. V: 5.0 V/div. H: 100 nS/div. TP/CN101 - pin 25 (MUTE) TP/IC503 - pin 9 (MIC_AUX_DATA) V: 2.0 V/div. H: 2.0 S/div. V: 5.0 V/div. H: 100 nS/div. DDJ-ERGO-V...
  • Page 75 TP/IC1201 - pin 10 (SW_AD_A) V: 2.0 V/div. H: 200 μS/div. V: 2.0 V/div. H: 100 mS/div. TP/IC1201 - pin 9 (SW_AD_B) V: 2.0 V/div. H: 100 mS/div. TP/IC1201 - pin 13 (AD_MIX1) V: 2.0 V/div. H: 100 mS/div. DDJ-ERGO-V...
  • Page 76 Q1211 E (GND_LED4) V: 1.0 V/div. H: 40 mS/div. V: 1.0 V/div. H: 40 mS/div. V: 2.0 V/div. H: 100 μS/div. TP/VR1204 - pin 4 (AD_PITCH1_2) TP/Q1202 B (LED_4) V: 2.0 V/div. H: 40 mS/div. V: 2.0 V/div. H: 100 μS/div. DDJ-ERGO-V...
  • Page 77 DDJ-ERGO-V...

  • Page 78: Pcb Connection Diagram

    1. The parts mounted on this PCB include all necessary parts for several destinations. For further information for respective desti- nations, be sure to check with the sche- matic diagram. 2. View point of PCB diagrams. Connector Capacitor SIDE A SIDE B P.C.Board Chip Part DDJ-ERGO-V...
  • Page 79 SIDE A MASTER2 JA2903 C2948 C2947 J2933 KN2901 MASTER1_L MASTER1_R J2955 MIC IN GND_AIC JA2905 JA2904 JA2901 C2939 C2937 [[ G ]] C2936 J2927 J2937 JACK J2939 J2906 DWX3304- /J C2938 (DNP2659-B) DDJ-ERGO-V...
  • Page 80 SIDE B JACK ASSY Q2903 Q2905 Q2907 IC2902 Q2902 Q2904 Q2906 DDJ-ERGO-V...
  • Page 81 SIDE B (DNP2659-B) IC2902 IC2904 IC2901 Q2901 IC2903 DDJ-ERGO-V...

  • Page 82: Ifpw, Hplc And Hpjk Assys

    C108 C344 C554 C139 Q507 R141 C552 C113 CN103 CN103 CN104 20 19 HPJK ASSY JH1901 1,GND_F2 DWX3306- /J HPJK 2,GND_F2 3,HP_L JH1901 [[ G ]] 4,GND_AH 5,HP_R DWX33 J1903 GND_AH J1904 GND_AH JA1901 KN1901 JA1902 Mini JACK (DNP2659-B) DDJ-ERGO-V...
  • Page 83 C325 C141 C552 L109 ( /2) C142 L110 Q510 R147 C109 (DNP2657-B) CN102 12 31 39 CN1004 HPLC ASSY JH3001 BOND BOND C3002 C3003 JH3001 6800uF 6800uF 6.3v 6.3v C3001 HPLC 6800uF 1,V+5_HP DWX3324- /J 6.3v 2,GND_D 3,V+5_HP_OUT (DNP2659-B) DDJ-ERGO-V...
  • Page 84 1.MIC_AUXIN_L 2.GND_AI 3.MIC_AUXIN_R 4.V-6_J 5.V+7_J DWX3301- /J 6.GND_AI 7.GND_AI IFPW 8.GND_AI 23.MASTER1_R- 9.GND_AO 24.GND_AO 10.GND_AO 25.MUTE 26.MIC_AUXIN_SW 11.MASTER1_L+ 27.MIC_AUXIN_SEL [[ G ]] 12.GND_AO 13.MASTER1_L- A30C5/C7 14.GND_AO 15.MASTER2_L 16.GND_AO 17.GND_AO 18.GND_AO 19.MASTER2_R 20.GND_AO 21.MASTER1_R+ 22.GND_AO CN102 HPLC ASSY JH3001 (DNP2659-B) DDJ-ERGO-V...
  • Page 85 SIDE B (DNP2657-B) CN104 CN103 HPJK ASSY JH1901 DWX3306- /J 1,GND_F2 HPJK 2,GND_F2 [[ G ]] 3,HP_L 4,GND_AH 5,HP_R Mini JACK HP JACK (DNP2659-B) DDJ-ERGO-V...

  • Page 86: Cdj1 And Crfd Assys

    J1222 J1084 J1149 J1323 J1053 VR1217 VR1210 J1130 J1110 J1199 J1330 J1022 J1109 S1206 J1308 S1229 S1216 S1234 J1260 VR1206 VR1207 Production Code KN1201 VR1213 VR1208 VR1204 VR1219 VR1212 VR1218 VR1211 VR1216 VR1214 VR1209 VR1217 VR1215 VR1210 VR1207 VR1206 DDJ-ERGO-V...
  • Page 87 S1214 S1223 S1230 NO USE J1087 J1286 J1307 J1055 J1273 J1149 J1241 J1110 J1043 J1024 J1005 J1025 S1220 S1225 S1231 J1138 S1224 D1252 D1273 J1152 J1348 VR1206 VR1202 VR1201 VR1203 J1252 J1322 VR1205 (DNP2658-B) VR1206 VR1205 VR1203 VR1202 VR1201 DDJ-ERGO-V...
  • Page 88 0 1 2 3 0 1 2 3 4 5 6 7 8 9 Q1201-Q1208, Q1211-Q1217 Q1244 Q1243 Q1242 Q1241 Q1240 Q1239 Q1238 Q1237 Q1233 Q1232 Q1229 Q1228 Q1225 Q1224 Q1221 Q1220 Q1235 Q1234 Q1231 Q1230 Q1227 Q1226 Q1223 Q1222 DDJ-ERGO-V...
  • Page 89 SIDE B JH1002 CN1004 IC1001 CN1002 IC1002 Q1236 Q1209 Q1218 Q1219 Q1214 Q1221 Q1220 IC1202 IC1201 Q1223 Q1222 [[ G ]] (DNP2658-B) IC1001 208, Q1211-Q1217 Q1238 Q1237 Q1209 Q1236 IC1002 Q1221 Q1220 Q1218 Q1219 IC1202 IC1201 Q1223 Q1222 DDJ-ERGO-V...

  • Page 90: Cdj2 Assy

    Production Code S2226 S2208 S2213 S2203 J2182 J2144 J2129 J2011 J2072 J2102 J2092 J2094 S2211 S2218 NO USE S2204 J2130 VR2208 J2175 J2037 J2126 J2113 J2083 J2116 J2093 S2205 S2219 J2169 J2178 VR2207 VR2205 VR2204 VR2203 J2062 J2105 J2157 J2003 DDJ-ERGO-V...
  • Page 91 J2175 J2053 VR2208 J2083 J2119 J2093 J2005 J2041 J2159 J2081 J2106 J2013 J2192 J2074 S2224 J2098 S2219 J2028 J2179 VR2201 VR2201 J2097 J2178 J2035 VR2202 J2191 VR2203 KN2201 VR2207 J2095 J2185 VR2205 J2052 VR2204 J2004 VR2203 VR2202 J2003 (DNP2659-B) DDJ-ERGO-V...
  • Page 92 SIDE B CDJ2 ASSY JH2001 Q2207 Q2203 Q2205 Q2215 Q2223 Q2221 Q2208 Q2204 Q2224 Q2222 Q2206 Q2218 IC2201 DDJ-ERGO-V...
  • Page 93 [[ G ]] Q2226 Q2225 Q2217 Q2214 Q2210 Q2216 Q2212 Q2209 Q2203 Q2207 Q2223 Q2221 Q2215 Q2211 Q2205 Q2203 Q2201 Q2211 Q2215 Q2201 NO USE Q2224 Q2204 Q2218 Q2213 Q2208 Q2206 Q2213 Q2218 Q2204 Q2202 Q2222 Q2202 IC2201 Q2220 Q2219 (DNP2659-B) DDJ-ERGO-V...

  • Page 94: Jog1, Jog2, Tch1 And Tch2 Assys

    CN1801 CN2801 management. TCH1 TCH2 DWS1437- /J DWS1439- /J (DNP2658-B) (DNP2658-B) TCH1 ASSY TCH2 ASSY SIDE B SIDE B TCH1 ASSY TCH2 ASSY (DNP2658-B) (DNP2658-B) CN2801 CN1801 JOG1 ASSY JOG2 ASSY (DNP2658-B) (DNP2658-B) CN1701 CN2701 H I J K DDJ-ERGO-V...

  • Page 95: Pcb Parts List

    C 2913 CCSRCH331J50 HLD2 ASS'Y DWX3310 C 2915,2963,2964 CEAT101M16 C 2920,2921,2923,2924 DCH1201 C 2922,2925,2932,2933 CEAL100M16 JACK ASSY C 2929,2957-2959,2961 CKSRYB104K16 C 2935-2940 CEAL101M16 SEMICONDUCTORS C 2943-2948 DCE1016 IC 2901,2902 NJM4565MD C 2974 CKSRYB104K16 IC 2903,2904 NJM2121MD Q 2901 LTC124EUB DDJ-ERGO-V...
  • Page 96 R 337 RS1/8SQ0R0J R 341,342,346,347 RS1/4SA270J Q 1211-1217 LSA1576UB R 535,536,552-559 RS1/10SR4701D Q 1218,1219,1237,1239 RN1903 Q 1220,1222,1224,1226 RN4982 R 540-543 RS1/10SR3301D Q 1221,1223,1225,1227 LSC4081UB R 560,562,564,566 RS1/10SR1002D Q 1228,1230,1232,1234 RN4982 R 561,563,565,567 RS1/10SR9101D R 568-572,575,576 RS1/10SR5600D Q 1229,1231,1233,1235 LSC4081UB DDJ-ERGO-V...
  • Page 97 KN 2201 EARTH TERMINAL AKF7002 C 1240,1250-1253,1266 CKSRYB103K50 VR 2201-2205 ROTARY VR DCS1078 C 1249 CEAT101M16 VR 2206 VARIABLE RESISTOR DCV1011 C 1260 CCSRCH470J50 VR 2207,2208 ROTARY VR DCS1117 C 1262-1265,1274 CKSRYB102K50 S 2201,2206,2209 TACT SWITCH DSG1089 C 1267,1270,1271 CKSRYB103K50 DDJ-ERGO-V...
  • Page 98 CN 2701 CONNECTOR ASS'Y PF04PG-B05 RESISTORS All Resistors RS1/10SR###J MISCELLANEOUS PC 2701 PHOTO INTERRUPTER SEDS-7573 CAPACITORS C 2701 CKSRYB105K10 TCH1 ASSY SEMICONDUCTORS IC 1801 GP1S094HCZ0F Q 1802 LSA1576UB MISCELLANEOUS CN 1801 3PJUMPER CONNECTOR 52151-0310 RESISTORS All Resistors RS1/10SR###J CAPACITORS C 1801 CKSRYB104K16 DDJ-ERGO-V...

Table of Contents