Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZWO 3101
Summary of Contents for Zanussi ZWO 3101
- Page 1 User manual Washing Machine ZWO 3101...
-
Page 2: Table Of Contents
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Technical information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3... -
Page 3: Environment Concerns
• Do not replace or change the mains cable. Contact the Water connection service centre. • Do not connect the appliance with old hoses already • Make sure not to cause damage to the mains plug and used. Only use new hoses. cable. -
Page 4: Product Description
Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 10 bar (1 MPa) Cold water Water supply Maximum load Cotton 3.5 kg Spin speed Maximum 1000 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. Product description Worktop Feet for the appliance level... -
Page 5: Control Panel
Control panel Programme knob Rinse hold button Start button Prewash button Display Spin button Easy iron button Delay Star button Extra rinse button Programme knob B • The default spin speed of the programme. Turn this knob to set a programme. •... -
Page 6: Programmes
• Decrease the maximum speed of the spin phase when Extra rinse button you set a programme. Press this button to add rinsing phases to a programme. Use this function for persons allergic to detergents and in The display shows only the spin speeds available areas where the water is soft. - Page 7 Programme Type of load and soil Programme Possible Temperature Weight of load phases functions Synthetic or mixed fabric items with nor- Wash mal level of soil Rinses Synthetics max. 1.7 kg Spin phase at 800 rpm 60° C Special programme for sport and casual Wash items with normal or light level of soil.
-
Page 8: Hints And Tips
Programme Type of load and soil Programme Possible Temperature Weight of load phases functions To cancel the programme that it operates or to deactivate the appliance. Consumption values Programme Energy consumption (KWh) Water consumption (litre) White Cottons 90 °C 43.5 Cottons 30 °C 0.26 Synthetics 60 °C... -
Page 9: Before First Use
Detergents and additives Water hardness If the water hardness in your area is high or moderate, we • Only use detergents and additives specially made for washing machines. recommend that you use a water softener for washing ma- chines. In areas where the water hardness is soft it is not •... - Page 10 Using the liquid detergent Caution! Make sure that no laundry stays • Pull out the detergent between the seal and the dispenser until it stops. door. There is a risk of wa- • Pull out the detergent ter leakage or damage to divider from its posi- the laundry.
-
Page 11: Care And Cleaning
Change a function To open the appliance door: You can change only the delay and spin function before • Do the steps 1 and 2 again. they operate. • Wait for some minutes. Press the related button to set the new value. •... - Page 12 Do this separately from the laundry wash. • Remove the top part of Maintenance wash the liquid additive com- partment. With the low temperature programmes it is possible that Clean all the parts with some detergent stays in the drum. Make regularly a main- water.
- Page 13 Clean the inlet valve filter Put a container be- It could be necessary to clean the filter when: low the recess of the • The appliance does not fill with water. drain pump to collect the water that flows • The appliance fills with the water for a long time. out.
-
Page 14: Troubleshooting
Frost precautions Empty the drain pump. Refer to the emergency drain procedure If the appliance is installed in an area where the tempera- When the drain pump is empty, install the inlet hose ture can be less than 0 °C, remove the remaining water again. - Page 15 Problem Possible cause Possible solution The connection of the water inlet Make sure that the connection is correct. hose is not correct. The water pressure is too low. Contact your local water authority. The appliance does not The water drain hose is damaged. Make sure that the water drain hose has no drain the water.
-
Page 16: Installation
Problem Possible cause Possible solution Too much laundry load. Decrease the laundry load. After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the service centre. Service We recommend that you write the Refer to the information supplied with this appliance for information here: guarantee condition and point of contact. - Page 17 Put the front piece on the floor behind the appli- ance. Carefully put down the appliance with the rear side on it. Make sure not to damage the ho- ses. Remove the internal film. Remove the polystyrene protection from the bot- tom.
- Page 18 Positioning and levelling • Install the appliance on a flat hard floor. • Make sure that carpets do not stop the air circulation below the appliance. • Make sure that the appliance does not touch the wall or other units Remove the four bolts with a key.
- Page 19 The inlet hose • On the edge of a sink. Make sure that the plastic guide cannot move when • Connect the hose to the appliance. Loose the ring the appliance drains. Attach the guide to the water nut to set it in the correct position. tap or the wall.
- Page 20 • To a sink spigot. • Directly to a built-in drain pipe in the room wall and Refer to the illustration. Put the drain hose in the tighten it with a clip. spigot and tighten it with a clip. Make sure that the drain hose makes a loop to prevent that remaining particles go in the appliance from the sink.
- Page 24 www.zanussi.com/shop...