• Make sure to remove all packaging and • Do not use the appliance for professional transport bolts. use. The appliance is only for domestic use. • Make sure that the mains plug is disconnec- ted from the mains socket during installation. www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
• To use the correct quantity of the detergent, please contact your local council, your check the water hardness of your domestic household waste disposal service or the shop system where you purchased the product. Packaging materials Recycle the materials with the symbol www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
1) Connect the water inlet hose to a water tap with a 3/4'' thread. Product description Worktop Feet for the appliance level Detergent dispenser Water drain hose Control panel Mains cable Door handle Water inlet valve Drain pump Transit bolts Rating plate Feet for the appliance level www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
Start button Prewash button Programme phase indicator Spin button Easy iron button Delay Star button Extra rinse button Programme knob Start button Turn this knob to set a programme. Press this button to start a programme. www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
Spin phase at the maxi- 60° C mum speed White and coloured cotton with nor- Wash mal or light soil. Rinses Cottons Economy max. 3.5 kg Spin phase at the maxi- 40° C mum speed www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
Page 7
All fabrics. Rinse with additive max. 3.5 kg Spin phase at the maxi- Rinse mum speed Spin phase for hand washed laundry. Drainage of the water Spin phase at the maxi- Spin mum speed www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
• Empty the pockets and unfold the items. the spin phase again. • Turn inside out multilayered fabrics, wool and Stubborn stains items with painted illustrations. For some stains, water and detergent is not • Remove hard stains. sufficient. www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
4. Use the correct quantity of detergent and additives. 2. Connect the mains plug to the mains sock- 5. Set and start the correct programme for the type of laundry and soil. 3. Put the laundry in the appliance. www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
Page 10
If you use a liquid detergent, put it imme- 3. Set the available functions. diately before you start the programme. When you press the relevant button, the in- dicator of the set function comes on. www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
Page 11
– You can open the door. 1. Turn the programme knob to to deacti- 4. Turn the programme knob to to deacti- vate the appliance. vate the appliance. 2. Wait for some minutes before to open the appliance door. www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
• Put back the dispenser in the recess. • Start a short programme for cotton at the maximum temperature with a small quantity Drain pump of detergent. Regularly examine the drain pump and make sure that it is clean. www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
Page 13
To clean the filter: 5. Unscrew the fil- • Close the water tap. ter and remove it. • Remove the inlet hose behind the appli- ance. www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
The appliance door is open. Close the door firmly. You do not press the start button Press the start button. The programme knob is not in the Turn the programme knob in the correct po- correct position. sition. www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
Page 15
'Installation'. You did not remove the packag- Remove the packaging and/or the transit ing and/or the transit bolts. bolts. Refer to 'Installation'. The load is very small. Add more laundry in the drum. www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
The information to give to the service is Model ....on the rating plate. Product number 914..... Serial number ....(S.N.) Installation Unpacking 1. Use the gloves. With a cutter remove the external film. Do not to discard the plastic cover (A). www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
Page 17
2. Remove the polystyrene packaging mate- rials. 3. Remove the internal film. 6. Remove the polystyrene protection from the bottom. 4. Open the door and remove all the items from the drum. www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
Page 18
• Loosen or tighten the feet to adjust the lev- el. A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in opera- tion. www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
Page 19
There are different procedures to connect the ner diameter of the drainpipe must be larg- drain hose: er than the external diameter of the drain hose. With the plastic hose guide Without the plastic hose guide www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
Page 20
Make sure that the drain hose makes a loop to prevent that remaining particles go in the appliance from the sink. www.zanussi.com Downloaded From WashingMachine-Manual.com Manuals...
Page 21
Downloaded From WashingMachine-Manual.com Manuals...
Page 22
Downloaded From WashingMachine-Manual.com Manuals...
Page 23
Downloaded From WashingMachine-Manual.com Manuals...
Page 24
Downloaded From WashingMachine-Manual.com Manuals...