SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
The ventilation opening in the base must not be covered by a • carpet, mat, or any floor covering. The appliance must be connected to the water mains using the • new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre.
• This appliance complies with the E.E.C. • Make sure that all metal objects are removed Directives. from the laundry. • Do not wash fabrics which are heavily soiled WATER CONNECTION with oil, grease or other greasy substances. It can damage rubber parts of the washing •...
Feet for levelling the appliance CHILD SAFETY DEVICE This device prevents children or pets to be closed in the drum. Turn the device clockwise, until the groove is horizontal. You cannot close the door. To close the door, turn the device anticlockwise until the groove is verti- cal.
PROGRAMMES PROGRAMME CHART Maximum load Programme Programme description Maximum spin Temperature range (Type of load and soil level) speed 5 kg White cotton and coloured cotton. Normal and heavy Cottons Flex (cot- 800 rpm soil. tons flex) 90°C - (Cold) 3 kg Synthetic items or mixed fabric items.
Page 7
Maximum load Programme Programme description Maximum spin Temperature range (Type of load and soil level) speed 3 kg Special programme for cotton and synthetic bed linen with Linens (linens) 800 rpm low spin speed to reduce wrinkles and ironing. 60°C - 30°C 5 kg Special programme for cotton items.
Approximate Energy con- Water con- Remaining programme Programmes Load (kg) sumption sumption (li- duration (mi- moisture (%) (kWh) tre) nutes) Wool/Handwash 30°C 0.25 1) At the end of spin phase. 2) Not available for some models. OPTIONS • The door stays locked. You must drain the water TEMP to unlock the door.
The indicator light goes on for delaying: 3, 6 & 9 hours. SETTINGS ACOUSTIC SIGNALS • To activate/deactivate this option, press The acoustic signals operate when: Prewash and Extra Rinse at the same • The programme is completed. time until the indicator comes on/goes off.
Page 11
DETERGENT COMPARTMENTS CAUTION! Use only specified deter- gents for washing machine. Always obey the instructions that you find on the packaging of the detergent products. Measure out the fabric Carefully close the deter- conditioner. gent drawer. SETTING A PROGRAMME 1. Turn the programme knob to switch the appliance on and set the programme: •...
Page 12
OPENING THE DOOR WHEN THE You can cancel or change the set of PROGRAMME OPERATES the Delay Start option before you While the programme operates, the appliance door press the button Start/Pause is locked and the indicator appears. After pressing the button Start/Pause CAUTION! If the temperature and you can only cancel the Start/ level of the water in the drum are too...
STAND-BY By pressing any button the appliance will come out of the energy saving status. Once the programme has finished, after a few minutes the energy saving system will be enabled. The brightness of the lights is reduced. HINTS AND TIPS THE LAUNDRY LOAD –...
Press the catch down- CAUTION! Do not use alcohol, wards as described in the solvents or chemical products. graphic and pull it out. DESCALING If the water hardness in your area is high or moderate, we recommend that you use a water descaling product for washing machines.
• If it is necessary, wait until the water has cooled Close the pump door. down. Open the pump door. Place a container close to the pump to collect any spillage. CAUTION! Never remove the filter during a washing cycle, always wait Unscrew carefully the until the appliance has finished the drain filter to drain out the...
FROST PRECAUTIONS 5. When the drain pump is empty, install the inlet hose again. If the appliance is installed in an area where the temperature can be less than 0° C, remove the WARNING! Make sure that the remaining water from the inlet hose and the drain temperature is higher than 0 °C before pump.
Problem Possible solution The appliance does not • Make sure that the sink spigot is not clogged. drain the water. • Make sure that the drain hose has no kinks or bends. • Make sure that the drain filter is not clogged. Clean the filter, if nec- essary.
Electrical connection Voltage 220-230 V Overall power 2000 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture Water supply pressure Minimum...