Maintenance; Cleaning The Lcd; Cleaning The Machine Surface; Cleaning The Hook - Brother Entrepreneur PR650e Operation Manual
Embroidery machine
Hide thumbs
Also See for Entrepreneur PR650e:
- Manual de instrucciones (280 pages) ,
- Operation manual (280 pages) ,
- Operating manual addendum (13 pages)
Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Maintenance
Simple embroidery machine maintenance operations are described below. Always keep the machine clean,
otherwise malfunctions may occur.
Cleaning the LCD
If the surface of the LCD is dirty, lightly wipe it with
a soft dry cloth. Do not use organic cleansers or
detergents.
Cleaning the machine surface
If the surface of the machine is slightly dirty, wipe it
with a soft dry cloth. If the machine is heavily dirty,
lightly soak a cloth in neutral detergent, squeeze it
out firmly, and then wipe the surface of the
machine. After cleaning it once with a wet cloth,
wipe it again with a dry cloth.
CAUTION
●
Unplug the power supply cord before
cleaning the machine, otherwise
injuries or an electric shock may occur.
● Do not use chemical products, such as
benzene or thinner.
Note
Cleaning the hook
Periodically remove lint and dust for better
performance from Hook race area.
Use the included cleaning brush.
1
Turn off the embroidery machine.
CAUTION
●
Unplug the power supply cord before
cleaning the machine, otherwise
injuries or an electric shock may occur.
2
Open the hook cover, and remove the
bobbin case. (Refer to page 36.)
Maintenance 245
7
Advertisement
Table of Contents
Troubleshooting
