Optional Accessories; Attaching An Optional Embroidery Frame For Industrial Embroidery Machines - Brother Entrepreneur PR650e Operation Manual
Embroidery machine
Hide thumbs
Also See for Entrepreneur PR650e:
- Manual de instrucciones (280 pages) ,
- Operation manual (280 pages) ,
- Operating manual addendum (13 pages)
Table of Contents
Advertisement
APPENDIX
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
OPTIONAL ACCESSORIES
Attaching an optional embroidery frame for industrial
embroidery machines
Prepare the embroidery frame holder in order to attach the embroidery frame for industrial embroidery
machines.
When the embroidery frame for industrial embroidery machines is attached, both the left and right arms of
the embroidery frame holder moves.
1
Remove the embroidery frame. (Refer to
page 68.)
2
Loosen the two thumb screws on the
embroidery frame holder.
1 Left arm
2 Thumb screws
The left arm of the embroidery frame
holder can be moved.
• Only loosen the thumb screws a maximum
of 2 turns counterclockwise. Do not
remove the screws.
3
Move the left arm to align the screw on the
right side with the mark for the embroidery
frame for industrial embroidery machines,
and then tighten the thumb screws.
1 Mark for embroidery frame for industrial
embroidery machines
2 Align the screw with the mark.
224
4
Using a Phillips screwdriver, loosen the two
screws, and then remove them.
5
Remove the right arm, align the pins on the
embroidery frame holder with the holes in
the arm, as shown in the illustration, and
then insert the screws removed in step
and tighten them.
The embroidery frame holder is ready for
the embroidery frame to be attached.
Attach the embroidery frame for industrial
embroidery machines in the same way
that included embroidery frames are
attached. (Refer to page 49.)
Note
● When using embroidery frames for
industrial embroidery machines, the
machine does not recognize the
embroidery area of the frame. Be sure to
use the trial sewing function to check that
the pattern fits within the embroidery area.
4
Advertisement
Table of Contents
Troubleshooting
