Inching Mode During Embroidering (Forcible Hoop Movement) - Brother BES-116 Instruction Manual
Electronic embroidery machine
Hide thumbs
Also See for BES-116:
- Supplementary manual (5 pages) ,
- User manual (3 pages) ,
- Supplement manual (3 pages)
Table of Contents
Advertisement
5-2 Inching Mode during Embroidering (Forcible Hoop Movement)
Note) • Moving the frame greatly in the inching mode may cause an interference with the machine.
Pay utmost care in the inching mode.
• Although the distance of the frame moved in the inching mode is stored even after turning OFF the
power, if the power is turned ON again and sewing is started, the pattern may be embroidered in a
different position. Be sure to use the inching mode appropriately.
1. Press the
switch in order to select the inching mode.
2. Press the jog switch and the hoop moves
to the direction of the pressed switch.
Note) • Note that the forcible hoop movement will
produce deviation of embroidering by the
amount.
• If the hoop and material are deviated from
each other during embroidering, correct it
by using the jog switches.
3. Pressing the "END" switch
resets the inching mode.
4. Press the "START" switch
restarts embroidering.
BES-116AC
Chapter 6 Operation of Machine
while pressing the
END
STOP
117
Advertisement
Table of Contents
