Advertisement
Table of Contents
- 1 Product View
- 2 Control Panel
- 3 Product Description
- 4 Dispenser Box
- 5 Safety Information
- 6 How to Run a Wash Cycle
- 7 Daily Use
- 8 Selecting Options
- 9 Interrupting a Programme
- 10 Programmes Table
- 11 Standby Mode
- 12 Care and Cleaning
- 13 Operating Problems
- 14 Detergents and Additives
- 15 Technical Specifications
- 16 Installation
- Download this manual
Advertisement
Table of Contents
Related Manuals for Zanussi ZWQ 6100
Summary of Contents for Zanussi ZWQ 6100
- Page 1 User manual Washing machine ZWQ 6120 ZWQ 6100...
-
Page 2: Product View
Product description 1. The control panel 2. Lid handle 3. Adjustable levelling feet The control panel 1. Programme selector 4. " Door locked " light 2. Pushbuttons and their functions 5. " Start/Pause " pushbutton 3. Display 6. " Delay start " pushbutton... -
Page 3: Dispenser Box
Dispenser box Prewash Wash Softener (do not fill above the MAX symbol Safety Information Please read these points carefully before installing and • If the appliance is installed on carpeted floor, ensure using your appliance. Keep this user manual with your that the carpet does not obstruct any ventilation appliance. -
Page 4: How To Run A Wash Cycle
• Empty pockets and unfold items. • This appliance is not intended for use by persons (in- • Your appliance is intended for normal domestic use. cluding children) with reduced physical, sensory or Do not use the appliance for commercial or industri- mental capabilities, or lack of experience and knowl- al purposes or for any other purpose. -
Page 5: Selecting Options
permanently activated, even if the appliance is switched the “Start/Pause” pushbutton flashes red for a few off. To deactivate it, repeat the process. seconds. “Delay start” Selecting the spin speed This option allows you to delay the start of a wash pro- Press the “... -
Page 6: Programmes Table
light is off. Turn the programme selector to the “Stop” Pause” pushbutton flashes red for a few seconds. If position . Remove washing. Unplug and close water you still decide to change the programme, you must can- inlet tap. cel the current programme (see below). Cancelling the programme Standby mode If you want to cancel the programme, turn the pro-... -
Page 7: Care And Cleaning
Programme / Type of washing Load Possible options 5,5 kg Delay start Spin : A spin cycle from 500 to 1200/1000 after a Rinse hold (or Night cycle plus). 1) Reference programme for test conforming to CEI 456 standard ( Cottons 60° + Eco option) : 49 L / 0,94 kWh / 210 min 2) Not available with Eco programme. - Page 8 Problems Causes The washing machine • the appliance isn’t plugged in correctly, the electrical installation isn’t working, doesn’t start or doesn’t fill : there is a power failure, • the lid of your appliance and the drum shutters aren’t closed firmly, •...
-
Page 9: Detergents And Additives
Problems Causes The washing machine stops • the water or electricity supply is defective, during a wash cycle : • a Rinse hold has been selected, • the drum shutters are open. The lid doesn’t open at the • the temperature inside the drum is too high, end of the cycle : •... -
Page 10: Technical Specifications
Technical Specifications DIMENSIONS Height 850 mm Width 400 mm Depth 600 mm LINE VOLTAGE /FREQUENCY 230 V / 50 Hz POWER CONSUMPTION 2300 W WATER PRESSURE Minimum 0,05 MPa (0,5 bar) Maximum 0,8 MPa (8 bar) Connection to water supply Type 20/27 Installation Remove all protective packaging for transit before using... - Page 11 be extended. If it is too short, please contact the after- appliance must not be connected with an extension lead sales service. or multi-plug adaptor. Ensure that the plug is earthed and that it is in accordance with current regulations. Drainage Positioning Fit the U-piece on the drain-...
- Page 12 www.zanussi.com/shop...