Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZWQ 385
Summary of Contents for Zanussi ZWQ 385
- Page 1 User manual Washing machine ZWQ 385 ZWQ 380 ZWQ 360...
-
Page 2: Product Description
Product description 1. The control panel 2. Lid handle 3. Adjustable levelling feet The control panel 1. Programme selector 4. "Start/Pause" pushbutton 2. Pushbuttons and their functions 5. "Delay start" pushbutton 3. Lights of cycle progress Dispenser box Prewash Wash Softener (do not fill above the MAX symbol... -
Page 3: Safety Information
Safety Information Please read these points carefully before installing and • The manufacturer cannot be held responsible for any using your appliance. Keep this user manual with your damage resulting from incorrect installation. appliance. Precautions to be taken against frost General safety If your appliance is exposed to temperatures below 0°C, •... -
Page 4: How To Run A Wash Cycle
How to run a wash cycle? Using for the first time • Remove the polystyrene insert and all other items in- side the drum. • Ensure the electrical and water connections com- • Run an initial wash cycle at 90°C, without any washing ply with the installation instructions. -
Page 5: Programmes Table
The lid will be locked during the delayed start time. If you “Start/Pause” pushbutton. If the modification is not pos- need to open it, you must first pause the appliance by sible, the “Start/Pause” pushbutton flashes red for a few pressing the “Start/Pause”... -
Page 6: Care And Cleaning
Programme / Type of washing Load/Time Possible options Sport (40°) : For dirty outside sport clothes. The 2,5 kg Rinse hold, Rinse plus, Delay start Prewash option is activated. 95-105 min Rinses : Hand washed items can be rinsed in this 5,5 kg Rinse hold, Rinse plus, Delay start programme. -
Page 7: Operating Problems
Operating Problems Numerous checks were carried out on your appliance be- function, please refer to the sections below before con- fore it left the factory. However, should you notice a mal- tacting the after-sales service. Problems Causes The washing machine •... -
Page 8: Detergents And Additives
Problems Causes The wash cycle is much too • the water inlet filters are dirty, long: • the power or water supply has been cut off, • the motor overheating detector has been activated, • the water inlet temperature is lower than usual, •... -
Page 9: Installation
WATER PRESSURE Minimum 0,05 MPa (0,5 bar) Maximum 0,8 MPa (8 bar) Connection to water supply Type 20/27 Installation Remove all protective packaging for transit before using for the first time. Keep in case needed for future transit: Transporting a non-secured appliance may damage in- ternal components and cause leakages and malfunctions. - Page 10 or multi-plug adaptor. Ensure that the plug is earthed and that it is in accordance with current regulations. Positioning Position the appliance on a flat and hard surface in a ven- tilated location. Ensure the appliance does not come into contact with the wall or other furniture.
- Page 12 www.zanussi.com...