Enable - Dell PowerEdge M420 Reference Manual
Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs
Also See for PowerEdge M420:
- Configuration manual (1246 pages) ,
- Getting started manual (202 pages) ,
- Owner's manual (121 pages)
Table of Contents
Advertisement
Syntax Description
Parameter
name
rip
static
connected
Default Configuration
This command has no default configuration.
Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example specifies the access list to filter routes received from
the RIP source protocol.
console(config-router)#distribute-list ACL40 out rip
enable
Use the enable command in Router OSPF Configuration mode to reset the
default administrative mode of OSPF in the router (active). Use the no form
of the command to disable the administrative mode for OSPF.
Syntax
enable
1094
OSPF Commands
Description
The name used to identify an existing ACL. The range is 1–31
characters.
Apply the specified access list when RIP is the source protocol.
Apply the specified access list when packets come through the
static route.
Apply the specified access list when packets come from a
directly connected route.
- Quick Links:
- Table of Contents
- Ethernet Configuration
Hide quick links:
Advertisement
Chapters
Table of Contents
