Protocol Vlan Group All - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide

Hide thumbs Also See for PowerEdge M420:

Table of Contents

User Guidelines

This command has no user guidelines.

The following example displays how to add a physical port interface to the

group ID of "2."

console(config-if-1/0/1)#protocol vlan group 2

protocol vlan group all

Use the protocol vlan group all command in Global Configuration mode to

add all physical interfaces to the protocol-based group identified by

A group may have more than one interface associated with it. Each interface

and protocol combination can be associated with one group only. If adding an

interface to a group causes any conflicts with protocols currently associated

with the group, this command fails and the interface(s) are not added to the

group. Ensure that the referenced VLAN is created prior to the creation of the

protocol-based group except when GVRP is expected to create the VLAN.

To remove all interfaces from this protocol-based group that is identified by

, use the no form of the command

protocol vlan group all

no protocol vlan group all

groupid — The protocol-based VLAN group ID, which is automatically

generated when you create a protocol-based VLAN group with the vlan

protocol group command. To see the group ID associated with the name

of a protocol group, use the show port protocol all command.

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

VLAN Commands

Show Quick Links

Table of Contents