Syslog Commands; Cli Logged To Local File And Syslog Server; Level - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide

Hide thumbs Also See for PowerEdge M420:

Table of Contents

Syslog Commands

The PowerConnect supports a centralized logging subsystem with support for

local in memory logs, crash dump logs, and forwarding messages to syslog

servers. All switch components use the logging subsystem. Components log

messages to the logging component using one of the following severity levels:

Emergency (0): system is unusable

Alert (1): action must be taken immediately

Critical (2): critical conditions

Error (3): error conditions

Warning (4): warning conditions

Notice(5): normal but significant conditions

Informational(6): informational messages

Debug(7): debug-level messages

The PowerConnect Command Logging component logs all command line

interface commands issued on the system. The command log messages are

stored with the other system logs and provide the system operators with a

detailed log of the commands executed.

CLI command logging is configured through any of the PowerConnect

management interfaces. When the feature is enabled, all CLI commands are

logged using the existing logging subsystems. By default, the feature is

The CLI command logging severity is set to SEVERITY_NOTICE. The

logging severity is not modifiable by the administrator.

For example, the CLI log message for the user admin is:

<189> JAN 10 18:59:09 10.27.21.22-2

CMDLOGGER[209809328]: cmd_logger_api.c(83) 367 %%

CLI:EIA-232:----:configure

Syslog Commands

Show Quick Links

Table of Contents