Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 383
Cli software configuration guide
Hide thumbs
Also See for AP775A - Nexus Converged Network Switch 5010:
- Configuration manual (1486 pages) ,
- Reference (886 pages) ,
- Command reference manual (792 pages)
Table of Contents
Advertisement
Configuring System Message Logging
Step 4
Step 5
Step 6
Step 7
Step 8
OL-16597-01
Command or Action
switch(config)# no logging
console [severity-level]
switch(config)# logging monitor
[severity-level]
switch(config)# no logging
monitor [severity-level]
switch# show logging console
switch# show logging monitor
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Configuring System Message Logging to Terminal Sessions
Purpose
value indicates a higher severity level). Severity levels range
from 0 to 7:
• 0 – emergency
• 1 – alert
• 2 – critical
• 3 – error
• 4 – warning
• 5 – notification
• 6 – informational
• 7 – debugging
If the severity level is not specified, the default of 2 is used.
(Optional)
Disables logging messages to the console.
Enables the switch to log messages to the monitor based on
a specified severity level or higher (a lower number value
indicates a higher severity level). Severity levels range from
0 to 7:
• 0 – emergency
• 1 – alert
• 2 – critical
• 3 – error
• 4 – warning
• 5 – notification
• 6 – informational
• 7 – debugging
If the severity level is not specified, the default of 2 is used.
The configuration applies to Telnet and SSH sessions.
(Optional)
Disables logging messages to telnet and SSH sessions.
(Optional)
Displays the console logging configuration.
(Optional)
Displays the monitor logging configuration.
337
Advertisement
Chapters
Table of Contents
Troubleshooting
