Clearing Telnet Sessions; Verifying The Ssh And Telnet Configuration; Default Ssh Settings - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual
Cli software configuration guide
Hide thumbs
Also See for AP775A - Nexus Converged Network Switch 5010:
- Configuration manual (1486 pages) ,
- Reference (886 pages) ,
- Command reference manual (792 pages)
Table of Contents
Advertisement
Configuring SSH and Telnet
The following example shows starting a Telnet session to connect to a remote device:
switch# telnet 10.10.1.1
Trying 10.10.1.1...
Connected to 10.10.1.1.
Escape character is '^]'.
switch login:
Clearing Telnet Sessions
To clear Telnet sessions from the Cisco Nexus 5000 Series switch, perform this task:
Procedure
Step 1
Step 2
Verifying the SSH and Telnet Configuration
To display the SSH configuration information, perform one of the following tasks:
Procedure
Step 1
Step 2
Step 3
Step 4
Default SSH Settings
The following table lists the default settings for SSH parameters.
Table 27: Default SSH Parameters
Parameters
SSH server
SSH server key
RSA key bits for generation
Telnet server
OL-16597-01
Command or Action
switch# show users
switch# clear line vty-line
Command or Action
switch# show ssh key [dsa | rsa]
switch# show running-config security
[all]
switch# show ssh server
switch# show user-account
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Clearing Telnet Sessions
Purpose
Displays user session information.
Clears a user Telnet session.
Purpose
Displays SSH server key-pair information.
Displays the SSH and user account configuration in
the running configuration. The all keyword displays
the default values for the SSH and user accounts.
Displays the SSH server configuration.
Displays user account information.
Default
Enabled
RSA key generated with 1024 bits
1024
Enabled
277
Advertisement
Chapters
Table of Contents
Troubleshooting
