Verifying Private Vlan Configuration - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Cli software configuration guide

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

Configuring Native 802.1Q VLANs on Private VLANs

Verifying Private VLAN Configuration

To display private VLAN configuration information, use the following commands:

switch# show feature

switch# show interface switchport

switch# show vlan private-vlan [type]

The following example shows how to display the private VLAN configuration:

switch# show vlan private-vlan

switch# show vlan private-vlan type

---- -----------------

The following example shows how to display enabled features (some of the output has been removed for

switch# show feature

Feature Name

--------------------

interface-vlan

private-vlan

Cisco Nexus 5000 Series Switch CLI Software Configuration Guide

Command or Action

switch(config-if)# no switchport

private-vlan trunk native {vlan vlan-id}

---------------

Removes the native VLAN ID from the private

Displays the features enabled on the switch.

Displays information on all interfaces configured as

switch ports.

Displays the status of the private VLAN.

-------------------------------------------

Eth1/12, Eth100/1/1

Verifying Private VLAN Configuration

Table of Contents