Setting A Static Ip Address On Your Pc - Cisco WBPN User Manual

Wireless-n bridge for phone adapters

Hide thumbs

Table Of Contents

Table of Contents

Installing the WBPN Wireless-N Bridge for Phone Adapters

Connecting the WBPN Using a PC

STEP 1

STEP 2

STEP 3

Cisco WBPN User Guide

button on your wireless device. The device will communicate with the

WBPN and connect it to your network.

Manually

Choose this option if your wireless device does not support WPS:

Enter the network name of your wireless network in the SSID field, or click Site

Survey to see a list of all wireless devices in the area. Click the Select button to

choose a device and click Next.

Select the type of encryption:

•

None—Choose if security is not enabled on your wireless device. (Not

recommended.)

•

WEP—Wired Equivalent Privacy encryption. WEP is a weak form of

encryption and is not recommended. With this type of security, you enter a

64 or 128-bit key on the WBPN, which the WBPN uses to authenticate with

your wireless router to provide a secure connection. You must choose the

key length and format, and enter the key in the Key Setting field.

•

WPA/PSK or WPA2/PSK—Wi-Fi Protected Access/pre-shared key

encryption. Either of these encryption types is more secure than WEP and is

recommended instead of WEP. Choose the protocol (TKIP or AES) and the

pre-shared key format (passphrase or HEX [64 characters]). If you chose

passphrase, enter a 8 to 63-character passphrase in the Pre-Shared Key

field. If you chose HEX (64 characters), enter a string of 64 hexadecimal

digits in the Pre-Shared Key field.

Click Next. The WBPN reboots.