(Optional) Change The Ip Address - Cisco Firepower 2100 Getting Started Manual
Hide thumbs
Also See for Firepower 2100:
- Getting started manual (222 pages) ,
- Manual (44 pages) ,
- Getting started manual (104 pages)
Table of Contents
Advertisement
ASA Deployment with ASDM
Step 4
Check the SYS LED on the front of the device; after it is solid green, the system has passed power-on
diagnostics.
Note
(Optional) Change the IP Address
If you cannot use the default IP address for ASDM access, you can set the IP address of the inside interface
at the ASA CLI.
Note
Procedure
Step 1
Connect to the ASA console port, and enter global configuration mode. See
on page 192
Step 2
Restore the default configuration with your chosen IP address.
configure factory-default [ip_address [mask]]
Note
Example:
ciscoasa(config)# configure factory-default 10.1.1.151 255.255.255.0
Based on the management IP address and mask, the DHCP address
pool size is reduced to 103 from the platform limit 256
Before you move the power switch to the OFF position, use the shutdown commands so that the
system can perform a graceful shutdown. This may take several minutes to complete. After the
graceful shutdown is complete, the console displays
panel blue locator beacon LED lights up indicating the system is ready to be powered off. You
can now move the switch to the OFF position. The front panel PWR LED flashes momentarily
and turns off. Do not remove the power until the PWR LED is completely off.
See the
FXOS Configuration Guide
This procedure restores the default configuration and also sets your chosen IP address, so if you made any
changes to the ASA configuration that you want to preserve, do not use this procedure.
for more information.
This command does not clear the currently-set mode, Appliance or Platform, for the Firepower
2100.
It is safe to power off now
for more information on using the shutdown commands.
Access the ASA and FXOS CLI,
Cisco Firepower 2100 Getting Started Guide
(Optional) Change the IP Address
. The front
183
Advertisement
Chapters
Table of Contents
