Table of Contents
Advertisement
Using the WBPN Wireless-N Bridge for Phone Adapters Configuration Utility
Viewing Status Information
Viewing Status Information
Cisco WBPN User Guide
When you finish making changes on a configuration page, click Apply (labeled #3
in Figure1) to save the changes. Click Reset (labeled #4 in Figure1), Clear, or
Cancel to undo your changes.
The WBPN provides information about its status, including system information and
statistics.
System Information
The following system information is provided:
Firmware Version
Build Time
Serial Number
HW_Rev
PID VID
Wired Network Information
The following wired network information is provided:
IP Address
Subnet Mask
Default Gateway
MAC Address
Send Packets
Firmware version that is installed on the WBPN.
Date and time that the firmware was built.
Unique serial number of the WBPN unit.
Hardware version number.
Product ID and version identifier of the WBPN.
IP address of the WBPN.
Subnet mask of the WBPN IP address.
The node that the network software uses when an IP
address does not match any other routes in the routing
table.
Hardware address of the wired (Ethernet) interface on
the WBPN.
Packets that have been transmitted over the Ethernet
interface from the WBPN to the network.
2
21
- Quick Links:
- Connecting the Wbpn Using a Pc
Hide quick links:
Advertisement
Table of Contents
