Obtaining The Autonomous Access Point Image File - Cisco AIR-BR1310G-A-K9 - Aironet 1310 Outdoor Access Point/Bridge Hardware Installation Manual
Wireless outdoor access point/bridge
Hide thumbs
Also See for AIR-BR1310G-A-K9 - Aironet 1310 Outdoor Access Point/Bridge:
- Datasheet (15 pages) ,
- Hardware installation manual (146 pages)
Table of Contents
Advertisement
Chapter 5
Troubleshooting Lightweight Access Points
Obtaining the Autonomous Access Point Image File
The autonomous access point image file can be obtained from the Cisco.com software center by
following these steps:
Use your Internet browser to access the Cisco Software Center at the following URL:
Step 1
http://www.cisco.com/cisco/software/navigator.html
Note
Click Wireless LAN Access > Aironet Access Points > Cisco Aironet 1300 Series .
Step 2
Click Cisco Aironet 1310 Access Point/Bridge.
Step 3
Step 4
On the Enter Network Password window, enter your Cisco.com username and password and click OK.
Step 5
Click IOS.
Choose the Cisco IOS release desired, such as 12.3.11.JA.
Step 6
Click WIRELESS LAN for an access point image file, such as c1310-k9w7-tar.123-11.JA.tar.
Step 7
On the Enter Network Password window, enter your Cisco.com username and password and click OK.
Step 8
On the Security Information window, click Yes to display non-secure items.
Step 9
On the Encryption Software Export Authorization page, read the information and check Yes or No to the
Step 10
question asking if the image is for use by you or your organization. Click Submit.
If you checked No, enter the requested information and click Submit.
Step 11
Click Yes to continue.
Step 12
Click DOWNLOAD.
Step 13
Read and accept the terms and conditions of the Software Download Rules.
Step 14
On the Enter Network Password window, enter your Cisco.com username and password and click OK.
Step 15
Click Save to download your image file to your hard disk.
Step 16
Select the desired download location on your hard disk and click Save.
Step 17
OL-5048-06
To download software from the Cisco.com software center, you must be a registered user. You
can register from the web page.
Cisco Aironet 1300 Series Wireless Outdoor Access Point/Bridge Hardware Installation Guide
Obtaining the Autonomous Access Point Image File
5-9
Advertisement
Table of Contents
