hit counter script
Download
Share
Print this page
Cisco Aironet 1300 Series Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Wireless Access Point
  5. Aironet 1300 Series
  6. Installation manual

Cisco Aironet 1300 Series Installation Manual

Hide thumbs Also See for Aironet 1300 Series:

Advertisement

Quick Links

Download this manual
C I S C O C O N F I D E N T I A L - F i r s t D r a f t
Cisco Aironet 1300 Series Bridge
Hardware Installation Guide
April 2004
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Text Part Number: OL-5048-01

Advertisement

loading

Related Manuals for Cisco Aironet 1300 Series

Summary of Contents for Cisco Aironet 1300 Series

  • Page 1 C I S C O C O N F I D E N T I A L - F i r s t D r a f t Cisco Aironet 1300 Series Bridge Hardware Installation Guide April 2004 Corporate Headquarters Cisco Systems, Inc.
  • Page 2 You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: •...

  • Page 3: Table Of Contents

    Key Features Power Integrated Antenna External Antenna Ethernet Ports Enclosure Bridge Connectors Bridge LEDs Network Configuration Examples Point-to-Point Configuration Port Aggregation or Redundancy Configuration Point-to-Multipoint Configuration Workgroup Bridge Configuration Access Point Configuration Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 4 C H A P T E R Before You Start Resetting the Bridge to Default Settings Obtaining and Assigning an IP Address Connecting to the Bridge Locally Assigning Basic Settings Default Settings on the Express Setup Page Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 5 Editing Commands through Keystrokes Editing Command Lines that Wrap Searching and Filtering Output of show and more Commands Accessing the CLI Opening the CLI with Telnet Opening the CLI with Secure Shell Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 6 Manufacturers Federal Communication Commission Declaration of Conformity Statement Department of Communications—Canada Canadian Compliance Statement European Community, Switzerland, Norway, Iceland, and Liechtenstein Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC Declaration of Conformity for RF Exposure Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 7 C I S C O C O N F I D E N T I A L - F i r s t D r a f t Guidelines for Operating Cisco Aironet Access Points and Bridges in Japan Japanese Translation...
  • Page 8 Contents C I S C O C O N F I D E N T I A L - F i r s t D r a f t Cisco Aironet 1300 Series Bridge Hardware Installation Guide viii OL-5048-01...

  • Page 9: Preface

    Series Bridge Hardware Installation Guide. Objectives This publication explains the steps for initial setup and basic configuration of the Cisco Aironet 1300 Series Wireless Bridge (hereafter called the bridge) supporting 2.4-GHz operation. This publication also provides troubleshooting information and detailed specifications.

  • Page 10: Conventions

    électriques et familiarisez-vous avec les procédures courantes de prévention des accidents. Pour obtenir les traductions des mises en garde figurant dans cette publication, veuillez consulter l’annexe intitulée « Translated Safety Warnings » (Traduction des avis de sécurité). Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 11: Related Publications

    Related Publications For more information about bridges and related products, refer to the following publications: Quick Start Guide: Cisco Aironet 1300 Series Bridge describes the bridge, system components, and • how to obtain bridge documentation. This document is included in the shipping box with your bridge.

  • Page 12: Obtaining Documentation

    Cisco Secure Access Control Server for Windows 2000/NT Servers Version 3.0 User Guide provides • complete instructions for using Cisco Secure ACS, including steps for configuring Cisco Secure ACS to support access points and bridges. This document is available on the Cisco CCO web site at the following URL: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/csnt30/user/index.htm...

  • Page 13: Ordering Documentation

    24 hours a day, 365 days a year. Accessing all the tools on the Cisco TAC website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a login ID or password, register at this URL: http://tools.cisco.com/RPF/register/register.do...

  • Page 14: Opening A Tac Case

    P4 cases. (Your network is minimally impaired or you require product information). After you describe your situation, the TAC Case Open Tool automatically recommends resources for an immediate solution. If your issue is not resolved using these recommendations, your case will be assigned to a Cisco TAC engineer.
  • Page 15 You can access Packet magazine at this URL: http://www.cisco.com/go/packet • iQ Magazine is the Cisco bimonthly publication that delivers the latest information about Internet business strategies for executives. You can access iQ Magazine at this URL: http://www.cisco.com/go/iqmagazine •...
  • Page 16 Obtaining Additional Publications and Information C I S C O C O N F I D E N T I A L - F i r s t D r a f t Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 17: Chapter 1 Overview

    C H A P T E R Overview The Cisco Aironet 1300 Series Bridget (hereafter called the bridge) is a wireless device designed for building-to-building wireless connectivity. Operating in the 2.4-GHz band (2.400 to 2.497 GHz), using the IEEE 802.11g standard, the bridge delivers 1 to 54 Mbps data rates without the need for a license.

  • Page 18: Key Features

    • Inline power over dual-coax cables • Receive Signal Strength Indicator (RSSI) LED patterns for easy antenna alignment • Bridge control using Cisco IOS commands, Internet browser, or SNMP • Figure 1-1 Bridge Configurations Integrated antenna bridge configuration External antenna bridge configuration Antenna connectors are available only on the external antenna bridge configuration.

  • Page 19: Power

    C I S C O C O N F I D E N T I A L - F i r s t D r a f t Power The bridge receives inline power from the Cisco Aironet Power Injector (hereafter called the power injector). Dual-coax cables are used to provide Ethernet data and power from the power injector to the bridge.

  • Page 20: Ethernet Ports

    Dual-coax Ethernet connectors—used to provide Ethernet signals and in-line power – External antenna bridge configuration • – Dual-coax Ethernet connectors—used to provide Ethernet signals and in-line power Dual antenna connectors—used to support a single antenna or dual-diversity antennas – Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 21: Bridge Leds

    Four LEDs are located on back of the housing to report installation and alignment conditions, bridge status, radio activity, and Ethernet activity (see Figure 1-3). Figure 1-3 Bridge LEDs Radio LED (R) Ethernet LED (E) Status LED (S) Install LED (I) Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 22: Network Configuration Examples

    Ethernet traffic. Backup communication redundancy can be achieved with this configuration when one wireless bridge link is used only if the other wireless bridge link fails. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 23: Point-To-Multipoint Configuration

    LAN networks. Figure 1-6 Point-to-Multipoint Bridge Configuration Bridge Bridge Bridge Workgroup Bridge Configuration The workgroup bridge configuration (Figure 1-7) connects remote workstations to an access point. Figure 1-7 Workgroup Bridge Configuration Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 24: Access Point Configuration

    C I S C O C O N F I D E N T I A L - F i r s t D r a f t Access Point Configuration The bridge’s access point configuration mode (Figure 1-8) supports remote bridge networks and wireless client devices. Figure 1-8 Access Point Configuration Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 25 This chapter includes the following sections: Safety Warnings, page 2-2 • Safety Information, page 2-3 • • Unpacking the Bridge, page 2-5 Before Beginning the Installation, page 2-6 • • Installation Summary, page 2-8 Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 26: Warnings

    7.9 inches (20 cm) or more from the body of all persons. Statement 332 Ultimate disposal of this product should be handled according to all national laws and regulations. Warning Statement 1040 Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 27: Safety Information

    FCC-certified equipment. When used with approved Cisco Aironet antennas, Cisco Aironet products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio device according to the instructions in this publication results in user exposure substantially below the FCC recommended limits.

  • Page 28: Typical Bridge Installation Components

    National Fire Protection Association (NFPA) 70, National Electrical Code (U.S.); Canadian Electrical Code, Part I, CSA 22.1 (Canada); and if local or national electrical codes are not available, refer to IEC 364, Part 1 through 7 (other countries). Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 29: Installation Guidelines

    Step 2 Ensure that all items listed in the “Package Contents” section are included in the shipment. If any item Step 3 is damaged or missing, notify your authorized Cisco sales representative. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 30: Package Contents

    • Ground lug for the bridge with screws • Weatherproofing kit (consisting of Coax Seal and electrical joint compound) • Quick Start Guide: Cisco Aironet 1300 Series Wireless Bridge • • Cisco Aironet 1300 Series Wireless Bridge Mounting Instructions •...
  • Page 31 Mounting studs Figure 2-3 Power Injector Indicators and Connectors Power injector dual-coax ports (F-Type connectors) Ethernet port (RJ-45 connector) Power LED Serial Console Port (RJ-45 connector) Power jack (12 to 48 VDC) Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 32: Installation Summary

    You can connect the dual-coax cable connectors to either of the grounding block connectors or the power injector’s dual-coax ports. The bridge senses the Ethernet signals and automatically switches internal circuitry to match the cable connections. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 33 Note Connect a ground wire to the grounding block. • Mount the bridge to the external tower or mast. For additional information, refer to the Cisco Aironet • 1300 Series Wireless Bridge Mounting Instructions that shipped with your bridge. Warning This equipment must be grounded.
  • Page 34 Installation Summary C I S C O C O N F I D E N T I A L - F i r s t D r a f t Cisco Aironet 1300 Series Bridge Hardware Installation Guide 2-10 OL-5048-01...
  • Page 35 Mounting the Bridge, page 3-2 • Mounting Hardware, page 3-2 • • Bridge LEDs, page 3-3 Aligning the Antenna Using RSSI LED Indications, page 3-5 • Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 36: Mounting The Bridge

    Typically, the bridge is installed on a rooftop, mast, tower, wall, or a suitable flat surface. Each of these installations requires a different approach. This document provides a mounting overview. For detailed mounting instructions, refer to the Cisco Aironet 1300 Series Wireless Bridge Mounting Instructions that shipped with your bridge.

  • Page 37: Bridge Bracket

    When you power up the bridge for the first time, it starts in a special installation mode. The LEDs indicate the startup status, operating mode, association status, and received signal strength. This information simplifies the process of activating the link and positioning the antenna from the bridge mounting location. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 38 Associated (non-root mode). Green blinking Root, searching Not associated (root mode). The bridge attempts to associate with a non-root bridge indefinitely. Green Root, associated Associated (root mode). 1. Preconfigured bridges search indefinitely. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 39: Aligning The Antenna Using Rssi Led Indications

    –72 to –69 Medium blink –75 to –72 Slow blink < –75 1. Slow blinking rate of 1 blink/sec. 2. Medium blinking rate of 2 blinks/sec. 3. Fast blinking rate of 4 blinks/sec. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 40 C I S C O C O N F I D E N T I A L - F i r s t D r a f t When using LEDs to maximize the signal, adjust the antenna until as many LEDs as possible are turned on and the rest are blinking as fast as possible. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 41: Stacking Bridges

    This chapter contains the following topics: Overview, page 4-2 • Choosing a Second Mounting Location, page 4-2 • • Installing the Stacked Bridges, page 4-2 Verifying Isolation - TBD, page 4-3 • Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 42: Overview

    You can double the throughput, or create a standby link, by stacking two bridges. A stacked installation consists of two bridge systems installed at the same physical location. For detailed mounting instructions refer to the Cisco Aironet 1300 Series Wireless Bridge Mounting Instructions that shipped with your bridge.

  • Page 43: Verifying Isolation - Tbd

    2 bridges (bridges B and D). For example; change the antenna polarization from vertical to horizontal. At Site 2, measure the isolation between bridge C and D by following these steps: Step 4 Turn off bridge A for this measurement. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 44 After you verify the isolation of the second bridge link, you must properly set the root and non-root bridge settings for both links, align the link 2 bridge antennas, and verify proper link 2 operation. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 45 What To Do Next, page 5-9 Using the IP Setup Utility, page 5-9 • • Assigning an IP Address Using the CLI, page 5-13 Using a Telnet Session to Access the CLI, page 5-13 • Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 46: Before You Start

    Enter your username in the User Name field. The default username is Cisco. Step 3 Enter the bridge password in the Password field and press Enter. The default password is Cisco. The Step 4 Summary Status page appears.

  • Page 47: Obtaining And Assigning An Ip Address

    IP address. The bridge’s MAC address is on label attached to the bottom of the bridge. Use the Cisco IP Setup Utility (IPSU) to identify the assigned address. You can also use IPSU – to assign an IP address to the bridge if it did not receive an IP address from the DHCP server.

  • Page 48: Assigning Basic Settings

    Enter the bridge’s IP address in the browser address line and press Enter. An Enter Network Password Step 2 screen appears. Press Tab to bypass the Username field and advance to the Password field. Step 3 Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 49 C I S C O C O N F I D E N T I A L - F i r s t D r a f t Enter the case-sensitive password Cisco and press Enter. The Summary Status page appears.
  • Page 50 When DHCP is enabled, the IP Address, Subnet Mask, and Default Gateway fields indicate Note Negotiated by DHCP Static IP—The bridge uses a static IP address that you enter in the IP address field. – Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 51 Non-root—Specifies that the bridge connects to a remote LAN network and must associate with – the root bridge using the wireless interface. When initially powered up, the bridge is configured in Install mode with automatic detection Note activated. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 52: Default Settings On The Express Setup Page

    Optimize Radio Network for Throughput 1. During Install Mode, the SSID is autoinstall. 2. After a static IP address is assigned or the role is changed from Install, the SSID is tsunami. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 53: What To Do Next

    (refer to “Maximum Power Levels and Antenna Gains” section on page D-3). To configure your bridge’s output power level, refer to the Cisco IOS Software Configuration Guide for Cisco Aironet Bridges. Protecting Your Wireless LAN To prevent unauthorized access to your network, you must configure security settings. Because the bridge is a radio device, the bridge communicates beyond the physical boundaries of your building.

  • Page 54: Obtaining And Installing Ipsu

    C I S C O C O N F I D E N T I A L - F i r s t D r a f t Obtaining and Installing IPSU IPSU is available on the Cisco web site. Follow these steps to obtain and install IPSU: Step 1 Use your web browser to go to the Cisco Software Center at the following URL: http://www.cisco.com/public/sw-center/sw-wireless.shtml...
  • Page 55 DHCP-assigned IP address. To change the bridge IP address from the default value using IPSU, refer to “Using IPSU to Set the Bridge’s IP Address and SSID” section on page 5-12. Cisco Aironet 1300 Series Bridge Hardware Installation Guide 5-11 OL-5048-01...

  • Page 56: Using Ipsu To Set The Bridge's Ip Address And Ssid

    Enter the SSID you want to assign to the bridge in the SSID field. Step 5 Note You cannot set the SSID without also setting the IP address. However, you can set the IP address without setting the SSID. Cisco Aironet 1300 Series Bridge Hardware Installation Guide 5-12 OL-5048-01...

  • Page 57: Assigning An Ip Address Using The Cli

    In Windows 2000, the Telnet window does not contain drop-down menus. To start the Telnet Note session in Windows 2000, type open followed by the bridge’s IP address. Step 3 In the Host Name field, type the bridge’s IP address and click Connect. Cisco Aironet 1300 Series Bridge Hardware Installation Guide 5-13 OL-5048-01...
  • Page 58 Using a Telnet Session to Access the CLI C I S C O C O N F I D E N T I A L - F i r s t D r a f t Cisco Aironet 1300 Series Bridge Hardware Installation Guide 5-14...

  • Page 59: Chapter 6 Using The Web-Browser Interface

    Using Online Help, page 6-5 The web-browser interface contains management pages that you use to change access point settings, upgrade firmware, and monitor and configure other wireless devices on the network. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 60: Using The Web-Browser Interface For The First Time

    Back button returns you to the previous page without saving any changes you have made. Clicking Cancel cancels any changes you made on the page and keeps you on that page. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 61: Using Action Buttons

    Express Setup Displays the Express Setup page that includes basic settings such as system name, IP address, and SSID. Network Map Displays a list of infrastructure devices on your wireless LAN. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 62 Updates status information or statistics displayed on a page. Cancel Discards changes to the page and remains on the page. Back Discards any changes made to the page and returns to the previous page. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 63: Character Restrictions In Entry Fields

    C I S C O C O N F I D E N T I A L - F i r s t D r a f t Character Restrictions in Entry Fields Because the 1100 series access point uses Cisco IOS software, there are certain characters that you cannot use in the entry fields on the web-browser interface.
  • Page 64 Using Online Help C I S C O C O N F I D E N T I A L - F i r s t D r a f t Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 65 Understanding CLI Messages, page 7-4 Using Command History, page 7-4 • Using Editing Features, page 7-6 • Searching and Filtering Output of show and more Commands, page 7-8 • Accessing the CLI, page 7-9 • Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 66: Ios Command Modes

    C I S C O C O N F I D E N T I A L - F i r s t D r a f t IOS Command Modes The Cisco IOS user interface is divided into many different modes. The commands available to you depend on which mode you are currently in. Enter a question mark (?) at the system prompt to obtain a list of commands available for each command mode.

  • Page 67: Getting Help

    For example, the no shutdown interface configuration command reverses the shutdown of an interface. Use the command without the keyword no to re-enable a disabled feature or to enable a feature that is disabled by default. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 68: Understanding Cli Messages

    • Changing the Command History Buffer Size, page 7-5 Recalling Commands, page 7-5 • Disabling the Command History Feature, page 7-5 • Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 69: Changing The Command History Buffer Size

    To disable the feature during the current terminal session, enter the terminal no history privileged EXEC command. To disable command history for the line, enter the no history line configuration command. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 70: Using Editing Features

    The buffer contains only the last 10 items that you have the last ten items that you deleted. deleted or cut. If you press Esc Y more than ten times, you cycle to the first buffer entry. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 71: Editing Command Lines That Wrap

    To scroll back to the beginning of the command entry, press Ctrl-B or the left arrow key repeatedly. You can also press Ctrl-A to immediately move to the beginning of the line. The arrow keys function only on ANSI-compatible terminals such as VT100s. Note Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 72: Searching And Filtering Output Of Show And More Commands

    | include protocol Vlan1 is up, line protocol is up Vlan10 is up, line protocol is down GigabitEthernet0/1 is up, line protocol is down GigabitEthernet0/2 is up, line protocol is up Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 73: Accessing The Cli

    At the username and password prompts, enter your administrator username and password. The default Step 4 username is Cisco, and the default password is Cisco. The default enable password is also Cisco. Usernames and passwords are case-sensitive. Opening the CLI with Secure Shell Secure Shell Protocol is a protocol that provides a secure, remote connection to networking devices set up to use it.
  • Page 74 Accessing the CLI C I S C O C O N F I D E N T I A L - F i r s t D r a f t Cisco Aironet 1300 Series Bridge Hardware Installation Guide 7-10...

  • Page 75: Chapter 8 Troubleshooting

    C H A P T E R Troubleshooting This chapter provides troubleshooting procedures for basic problems with the bridge. For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at the following URL (select Hardware Support > Wireless Devices): http://www.cisco.com/tac...

  • Page 76: Checking The Bridge Leds

    Blinking — — Transmitting and receiving Ethernet errors. amber amber — — Firmware error—disconnect and reconnect the power injector power jack. If the problem continues, contact technical support for assistance. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 77 LED flashing red to count out the first digit, then a short pause, followed by the LED flashing red to count out the second digit. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 78: Power Injector

    The bridge begins to load the IOS image when the Post operations are successfully completed. Upon successfully loading the IOS image, the bridge initializes and tests the radio. The power injector LED is shown in Figure 8-2. Figure 8-2 Power Injector Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 79: Checking Power

    Check (MIC), WEP key hashing, and 802.1X protocol versions. If a non-root bridge is unable to authenticate to your root bridge, verify that the security settings are the same as your bridge settings. For additional information, refer to the Cisco IOS Software Configuration Guide for Cisco Aironet Bridges.

  • Page 80: Resetting To The Default Configuration - Tbd

    C I S C O C O N F I D E N T I A L - F i r s t D r a f t For detailed alignment instructions, refer to the Cisco Aironet 1300 Series Wireless Bridge Mounting Instructions that shipped with your bridge.

  • Page 81: Reloading The Bridge Image - Tbd

    C I S C O C O N F I D E N T I A L - F i r s t D r a f t Enter the bridge password (default Cisco) in the Password field and press Enter. The Summary Status Step 4 page appears.

  • Page 82: Web Browser Interface - Tbd

    After the bridge reboots, you must reconfigure the bridge by using the Web interface, the Telnet Step 6 interface, or IOS commands (refer to the Cisco IOS Software Configuration Guide for Cisco Aironet Bridges). The bridge is configured with the factory default values including the IP address (set to receive an IP Note address using DHCP).

  • Page 83: Obtaining The Bridge Image File

    For additional information click the Help icon on the Software Upgrade screen. Obtaining the Bridge Image File You can obtain the bridge image file from the Cisco.com software center by following these steps: Use your web browser to go to the Cisco Software Center at the following URL: Step 1 http://www.cisco.com/public/sw-center/sw-wireless.shtml...
  • Page 84 Reloading the Bridge Image - TBD C I S C O C O N F I D E N T I A L - F i r s t D r a f t Cisco Aironet 1300 Series Bridge Hardware Installation Guide 8-10...

  • Page 85: Appendix

    Statement 1004—Installation Instructions, page A-6 Statement 1005—Circuit Breaker, page A-7 • • Statement 1024—Ground Conductor, page A-8 Statement 1040—Product Disposal, page A-9 • • Statement 1052—Installing and Grounding the Antenna, page A-11 Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 86: Statement 84-Warning Definition

    å unngå ulykker. (Hvis du vil se oversettelser av de advarslene som finnes i denne publikasjonen, kan du se i vedlegget "Translated Safety Warnings" [Oversatte sikkerhetsadvarsler].) Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 87 Advarsel Ikke bruk den trådløse nettverksenheten nært inntil uisolerte fenghetter eller i et eksplosivt miljø med mindre enheten er modifisert slik at den tåler slik bruk. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 88: Antenna Installation Warning

    Comunicaciones (FCC) es preciso ubicar las antenas a un mínimo de 20 cm (7,9 pulgadas) o más del cuerpo de las personas. Varning! För att följa FCC-exponeringsgränserna för radiofrekvens (RF), bör antenner placeras på minst 20 cm avstånd från alla människor. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 89: Statement 1001-Work During Lightning Activity

    No operar el sistema ni conectar o desconectar cables durante el transcurso de descargas eléctricas en la atmósfera. Varning! Vid åska skall du aldrig utföra arbete på systemet eller ansluta eller koppla loss kablar. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 90: Statement 1004-Installation Instructions

    Leia as instruções de instalação antes de ligar o sistema à fonte de energia. ¡Advertencia! Lea las instrucciones de instalación antes de conectar el sistema a la red de alimentación. Varning! Läs installationsanvisningarna innan du kopplar systemet till strömförsörjningsenheten. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 91: Statement 1005-Circuit Breaker

    Denna produkt är beroende av i byggnaden installerat kortslutningsskydd (överströmsskydd). Kontrollera att skyddsanordningen inte har högre märkvärde än: (120 VAC, 15A U.S. (240 VAC, 10A international) (120 VAC, 15A U.S. (240 VAC, 10A international) Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 92: Statement 1024-Ground Conductor

    Se non si è certi della disponibilità di un adeguato collegamento di messa a terra, richiedere un controllo elettrico presso le autorità competenti o rivolgersi a un elettricista. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 93: Statement 1040-Product Disposal

    Ultimate disposal of this product should be handled according to all national laws and regulations. Warning Statement 1040 Waarschuwing Het uiteindelijke wegruimen van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 94 O descarte definitivo deste produto deve estar de acordo com todas as leis e regulamentações nacionais. Advarsel Endelig bortskaffelse af dette produkt skal ske i henhold til gældende love og regler. Cisco Aironet 1300 Series Bridge Hardware Installation Guide A-10 OL-5048-01...

  • Page 95: Statement 1052-Installing And Grounding The Antenna

    Pour une installation et mise à la terre correctes de l'antenne, veuillez consulter les codes nationaux et locaux (par exemple, États-Unis : NFPA 70, National Electrical Code, Article 810 ; Canada : Code électrique canadien, Section 54). Cisco Aironet 1300 Series Bridge Hardware Installation Guide A-11 OL-5048-01...
  • Page 96 För riktig installation och jordning av antennen, hänvisas du till nationella och lokala koder (t.ex. USA: NFPA 70, National Electrical Code, Article 810, Kanada: Canadian Electrical Code, Section 54). Cisco Aironet 1300 Series Bridge Hardware Installation Guide A-12 OL-5048-01...
  • Page 97 Statement 1052—Installing and Grounding the Antenna C I S C O C O N F I D E N T I A L - F i r s t D r a f t Cisco Aironet 1300 Series Bridge Hardware Installation Guide A-13...
  • Page 98 Statement 1052—Installing and Grounding the Antenna C I S C O C O N F I D E N T I A L - F i r s t D r a f t Cisco Aironet 1300 Series Bridge Hardware Installation Guide A-14...

  • Page 99: Appendix

    European Community, Switzerland, Norway, Iceland, and Liechtenstein, page B-3 • • Declaration of Conformity for RF Exposure, page B-5 Guidelines for Operating Cisco Aironet Access Points and Bridges in Japan, page B-5 • Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 100: Manufacturers Federal Communication Commission Declaration Of Conformity Statement

    The Part 15 radio device operates on a non-interference basis with other devices operating at this Caution frequency. Any changes or modification to said product not expressly approved by Cisco could void the user’s authority to operate this device. Cisco Aironet 1300 Series Bridge Hardware Installation Guide...

  • Page 101: Department Of Communications-Canada

    διατάξεις της Οδηγίας 1999/5/EΚ. Français: Cet appareil est conforme aux exigencies essentialles et aux autres dispositions pertinantes de la Directive 1999/5/EC. Íslenska: Þessi búnaður samrýmist lögboðnum kröfum og öðrum ákvæðum tilskipunar 1999/5/ESB. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 102 The above CE mark is required as of April 8, 2000 but might change in the future. This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to Note certain frequencies and/or may require a license for operation. For more details, contact Cisco Corporate Compliance. Note...

  • Page 103: Declaration Of Conformity For Rf Exposure

    The bridge should be installed more than 20 cm from your body or nearby persons. Guidelines for Operating Cisco Aironet Access Points and Bridges in Japan This section provides guidelines for avoiding interference when operating Cisco Aironet access points and bridges in Japan. These guidelines are provided in both Japanese and English. Japanese Translation...

  • Page 104: Administrative Rules For Cisco Aironet Bridges In Taiwan

    C I S C O C O N F I D E N T I A L - F i r s t D r a f t Administrative Rules for Cisco Aironet Bridges in Taiwan This section provides administrative rules for operating Cisco Aironet bridges in Taiwan. The rules are provided in both Chinese and English.

  • Page 105: Appendix

    C I S C O C O N F I D E N T I A L - F i r s t D r a f t A P P E N D I X Bridge Specifications This appendix provides technical specifications for the Cisco Aironet 1300 Series Bridge, power injector, and power module. Table C-1 lists the technical specifications TBD.
  • Page 106 CCK (5.5 Mbps and 11 Mbps) — BPSK (1 Mbps, 6 Mbps and 9 Mbps) QPSK (2 Mbps, 12 Mbps and 18 Mbps) 16-QAM (24 Mbps and 36 Mbps) 64-QAM (48 Mbps and 54 Mbps) Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 107 CSA C22.2 No. 60950 CSA C22.2 No. 60950 IEC 60950 IEC 60950 EN 60950 EN 60950 The power injector and the power Note module must be used in an indoor environment. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 108 VCCI Class B EN 301.489-1 EN 301.489-17 Radio Type Approvals Bridge radio: — FCC Parts 15.247, 15.205, 15.209 FCC Bulletin OET-65C Canada RSS-102, and RSS-210 Japan ARIB-STD-33B Japan ARIB-STD-66 Europe EN 300.328 Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 109: Operating Range

    (3.1 Km) 21 dBi dish antennas Point-to-multipoint configuration 1.6 mi 0.9 mi 0.4 mi 0.2 mi (2.6 Km) (1.4 Km) (0.64 Km) (0.32 Km) 5.2 dBi omnidirectional antenna 13 dBi integrated antennas Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...
  • Page 110 12 dBi omnidirectional antenna 13 dBi integrated antennas Point-to-multipoint configuration 4.0 mi 2.3 mi 1.0 mi 0.6 mi (6.4 Km) (3.7 Km) (1.6 Km) (0.97 Km) 12 dBi omnidirectional antenna 21 dBi dish antennas Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 111: Appendix

    This appendix lists the IEEE 802.11g (2.4-GHz) channels, maximum power levels, and antenna gains supported by the world’s regulatory domains. The following topics are covered in this appendix: Channels, page D-2 • • Maximum Power Levels and Antenna Gains, page D-3 Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 112: Channels

    9 through 11 can be used indoors and outdoors. Users are responsible for ensuring that the channel set configuration is in compliance with the regulatory standards of Mexico. Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 113: Ieee 802.11G (2.4-Ghz Band

    Maximum Power Level (mW) Antenna Gain Regulatory Domain (dBi) OFDM Americas (–A) (4 W EIRP maximum) 13.5 EMEA (–E) and Israel(-I) (100 mW EIRP maximum) 13.5 — Japan (-J) (10 mW/MHz EIRP maximum) 13.5 Cisco Aironet 1300 Series Bridge Hardware Installation Guide OL-5048-01...

  • Page 114: Changing The Bridge's Output Power

    Password screen appears. Enter your username (default Cisco) in the User Name field. Step 3 Enter the bridge password (default Cisco) in the Password field and press Enter. The Summary Status Step 4 page appears. Click Network Interfaces and the network interface menu appears.

  • Page 115: G L O S S A R Y

    Boot Protocol. A protocol used for the static assignment of IP addresses to devices on the network. BOOTP A modulation technique used by IEEE 802.11b-compliant wireless LANs for transmission at 1 BPSK Mbps. Cisco Aironet 1300 Series Bridge Hardware Installation Guide GL-1 OL-5048-01...
  • Page 116 IP addresses. Direct sequence spread spectrum. A type of spread spectrum radio transmission that spreads its DSSS signal continuously over a wide frequency band. Cisco Aironet 1300 Series Bridge Hardware Installation Guide GL-2 OL-5048-01...
  • Page 117 Media Access Control address. A unique 48-bit number used in Ethernet data packets to identify an Ethernet device, such as an access point or your client adapter. Any of several techniques for combining user information with a transmitter’s carrier signal. modulation Cisco Aironet 1300 Series Bridge Hardware Installation Guide GL-3 OL-5048-01...
  • Page 118 Radio frequency. A generic term for radio-based technology. A wireless transceiver connected to the main Ethernet network that communicates with other root bridge wireless transceivers connected to remote Ethernet networks. Cisco Aironet 1300 Series Bridge Hardware Installation Guide GL-4 OL-5048-01...
  • Page 119 A feature of some Access Points that allows users to move through a facility while maintaining an roaming unbroken connection to the LAN. A connector type unique to Cisco Aironet radios and antennas. Part 15.203 of the FCC rules RP-TNC covering spread spectrum devices limits the types of antennas that may be used with transmission equipment.
  • Page 120 Glossary C I S C O C O N F I D E N T I A L - F i r s t D r a f t Cisco Aironet 1300 Series Bridge Hardware Installation Guide GL-6 OL-5048-01...

  • Page 121: I N D E X

    EIRP, maximum 5-9 to ??, D-3 to ?? environmental conditions Cisco Aironet 1300 Series Bridge Hardware Installation Guide IN-1 OL-5048-01...
  • Page 122 IP address, finding and setting 5-10 IPSU safety warnings, translated site survey size 5-11, 5-12 SSH Communications Security, Ltd. management options, CLI SSID, troubleshooting modulation Cisco Aironet 1300 Series Bridge Hardware Installation Guide IN-2 OL-5048-01...
  • Page 123 C I S C O C O N F I D E N T I A L - F i r s t D r a f t Telnet 5-13 temperature, operating TFTP server troubleshooting unpacking user EXEC mode warning, defined x to xi warnings 2-2, A-1 Web-based interface common buttons weight Cisco Aironet 1300 Series Bridge Hardware Installation Guide IN-3 OL-5048-01...
  • Page 124 Index C I S C O C O N F I D E N T I A L - F i r s t D r a f t Cisco Aironet 1300 Series Bridge Hardware Installation Guide IN-4 OL-5048-01...