hit counter script
Cisco Aironet 1200 Series Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Wireless Access Point
  5. Aironet 1200 Series
  6. Hardware installation manual
Cisco Aironet 1200 Series Hardware Installation Manual

Cisco Aironet 1200 Series Hardware Installation Manual

Ol-2155-02
Hide thumbs Also See for Aironet 1200 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Configuration Manual
Cisco Aironet 1200 Series Access Point
Hardware Installation Guide, OL-2155-02
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Text Part Number: OL-7043-02

Advertisement

Chapters

Table of Contents
loading

Related Manuals for Cisco Aironet 1200 Series

Summary of Contents for Cisco Aironet 1200 Series

  • Page 1 Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Text Part Number: OL-7043-02...
  • Page 2 You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: •...

  • Page 3: Table Of Contents

    Ethernet and Console Ports Ethernet Port Console Port Metal Enclosure Indicators Security Lock Feature Network Configuration Examples Root Unit on a Wired LAN Repeater Unit That Extends Wireless Range Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 4 Setting the Access Point IP Address and SSID Entering Basic Settings Using an Internet browser Using a Terminal Emulator Selecting Pages and Settings Applying Changes to the Configuration Assigning Basic Settings Default Basic Settings 3-13 Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 5 Resetting to the Default Configuration Translated Safety Warnings A P P E N D I X Dipole Antenna Installation Warning Explosive Device Proximity Warning Installation and Grounding Warning Lightning Activity Warning Installation Warning Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 6 Channels IEEE 802.11b (2.4 GHz Band) IEEE 802.11a (5-GHz Band) Maximum Power Levels and Antenna Gains IEEE 802.11b (2.4 GHz Band) IEEE 802.11a (5-GHz Band) N D E X Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 7: Preface

    2.4-GHz and 5-GHz operation. This publication also provides troubleshooting information and detailed specifications. Audience This publication is for the person installing and configuring a Cisco Aironet 1200 Series Access Point for the first time. The installer should be familiar with network structures, terms, and concepts. Organization This guide contains the following sections: Chapter 1, “Overview,”...

  • Page 8: Conventions

    Cisco Secure Access Control Server for Windows 2000/NT Servers Version 3.0 User Guide provides • complete instructions for using Cisco Secure ACS, including steps for configuring Cisco Secure ACS to support access points. This document is available on the Cisco CCO web site at the following URL: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/csnt30/user/index.htm...

  • Page 9: Obtaining Documentation

    PC card and PCI card client adapters, and instructions for installing and using the wireless client adapter utilities running the Linux operating system. This document is available on the Cisco CCO web site at the following URL: http://www.cisco.com/univercd/cc/td/doc/product/wireless/index.htm...

  • Page 10: Documentation Feedback

    • Register for online skill assessment, training, and certification programs • If you want to obtain customized information and service, you can self-register on Cisco.com. To access Cisco.com, go to this URL: http://www.cisco.com Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02...

  • Page 11: Technical Assistance Center

    Cisco TAC Web Site You can use the Cisco TAC Web Site to resolve P3 and P4 issues yourself, saving both cost and time. The site provides around-the-clock access to online tools, knowledge bases, and software. To access the Cisco TAC Web Site, go to this URL: http://www.cisco.com/tac...
  • Page 12 Preface Obtaining Technical Assistance Before calling, please check with your network operations center to determine the level of Cisco support services to which your company is entitled: for example, SMARTnet, SMARTnet Onsite, or Network Supported Accounts (NSA). When you call the center, please have available your service agreement number and your product serial number.

  • Page 13: Chapter 1 Overview

    C H A P T E R Overview The Cisco Aironet 1200 Series Access Point (hereafter called the access point) delivers a cost-effective, reliable, secure, and easily managed wireless LAN solution for enterprise customers and for small and medium sized businesses. The access point is designed to incorporate new technology enhancements as they become available.

  • Page 14: Key Features

    Unlicensed National Information Infrastructure (UNII) radio transceiver operating in two of the UNII 5-GHz frequency bands and supporting up to 8 channels: UNII 1—Frequency range is 5.15 to 5.25 GHz • UNII 2—Frequency range is 5.25 to 5.35 GHz • Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 15: Power

    – A 1200 series power module (Universal power supply) • The 1200 series power injectors are designed for use with Cisco Aironet 1200 Series Access Points only. Caution Using the power injector with other Ethernet-ready devices can damage the equipment.

  • Page 16: Antenna Connectors

    Access Point Specifications, page 1-10). If you plan to mount the access point in environmental air space using a 5-GHz radio, Cisco recommends Note that you mount the access point horizontally with its antennas pointing down. Doing so results in the access point complying with regulatory requirements for environmental air space with the 5-GHz radio installed.

  • Page 17: Indicators

    Note The Radio and Status indicators are used for both 2.4-GHz and 5-GHz radio operation. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 18: Security Lock Feature

    The security cable keyhole allows you to secure the access point using a standard security cable, such as the security cables used on laptop computers. Figure 1-2 Access Point Security Points Security cable keyhole Security hasp for padlock 5-GHz module slot access cover Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 19: Network Configuration Examples

    LAN. Figure 1-3 Access Points as Root Units on a Wired LAN Access Point (Root Unit) Wired LAN Access Point (Root Unit) Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 20: Repeater Unit That Extends Wireless Range

    LAN. The data is sent through the route that provides the greatest performance for the client. Figure 1-4 shows an access point acting as a repeater. Figure 1-4 Access Point as Repeater Access Point (Root Unit) Wired LAN Access Point (Repeater) Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 21: Central Unit In An All-Wireless Network

    Figure 1-5 shows an access point in an all-wireless network. Figure 1-5 Access Point as Central Unit in All-Wireless Network Access Point (Root Unit) Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 22: Access Point Specifications

    (Depending on the regulatory domain in UNII 2—5.25 to 5.35 GHz which the access point is installed) (Depending on the regulatory domain in which the access point is installed) Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 1-10 OL-7043-02...
  • Page 23 Caution building’s environmental air space, such as above suspended ceilings. If you plan to mount the access point in environmental air space using a 5-GHz radio, Cisco Note recommends that you mount the access point horizontally with its antennas pointing down.
  • Page 24 EMI and Susceptibility FCC Part 15.107 and 15.109 Class B ICES-003 Class B (Canada) EN 55022 B AS/NZS 3548 Class B VCCI Class B EN 55024 EN 301.489-1 EN 301.489-17 RF Exposure OET-65C RSS-102 ANSI C95.1 Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 1-12 OL-7043-02...
  • Page 25 Unpacking the Access Point, page 2-6 Before Beginning the Installation, page 2-7 • Installation Summary, page 2-8 • Connecting the 2.4-GHz Antennas, page 2-8 • Connecting the Ethernet and Power Cables, page 2-9 • Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 26: Chapter 2 Installation

    FCC-certified equipment. When used with approved Cisco Aironet antennas, Cisco Aironet products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio device according to the instructions in this publication results in user exposure substantially below the FCC recommended limits.

  • Page 27: Warnings

    This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that Warning a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase conductors (all current-carrying conductors). Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 28: Installation Guidelines

    Caution environmental air space, such as above suspended ceilings. If you plan to mount the access point in environmental air space using a 5-GHz radio, Cisco recommends Note that you mount the access point horizontally with its antennas pointing down. Doing so will result in the access point complying with regulatory requirements for environmental air space with the 5-GHz radio installed.

  • Page 29: Coverage Options

    This configuration reduces the aggregate radio system throughput. Heavy cell overlap is not recommended for maximum system throughput. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 30: Site Surveys

    Ensure that all items listed in the “Package Contents” section are included in the shipment. Check each Step 3 item for damage. If any item is damaged or missing, notify your authorized Cisco sales representative. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 31: Package Contents

    48 VDC power port Status LEDs Ethernet port (RJ-45) Mounting bracket Console port (RJ-45) Figure 2-3 5-GHz Radio Module 5-GHz radio module mounting screws Access point 5-GHz radio module antenna (patch position) Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 32: Installation Summary

    On a vertical surface, such as a wall, orient the antenna straight up. • On a ceiling, orient the antenna straight down. • If you are using another Cisco Aironet antenna, refer to the instructions that came with your antenna. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 33: Connecting The Ethernet And Power Cables

    The access point power options are listed below: A switch with inline power, such as a Cisco Catalyst 3524-PWR-XL Switch • An inline power patch panel, such as a Cisco Catalyst Inline Power Patch Panel • A 1200 series power injector •...
  • Page 34 During normal operation, the LEDs blink green. Refer to Chapter 7, “Troubleshooting,” for LED descriptions. Refer to Chapter 3, “Basic Configuration,” to assign basic settings to the access point. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 2-10 OL-7043-02...

  • Page 35: Basic Configuration

    This chapter describes the initial configuration of the access point using the Internet browser-based management system and the serial interface. You can also reach the management system through a Telnet session. Consult the Cisco Aironet 1200 Series Access Point Software Configuration Guide for complete instructions on using these interfaces.

  • Page 36: Chapter 3 Basic Configuration

    Summary of Configuration Steps You use the Express Setup page to assign basic settings to the access point. For instructions on setting up security, filtering, and other access point features, refer to the Cisco Aironet 1200 Series Access Point Software Configuration Guide.

  • Page 37: Using The Ip Setup Utility

    IP address and the SSID. Obtaining and Installing IPSU IPSU is available on the Cisco web site. Follow these steps to obtain and install IPSU: Step 1 Use your Internet browser to access the Cisco Software Center at the following URL: http://www.cisco.com/public/sw-center/sw-wireless.shtml...

  • Page 38: Setting The Access Point Ip Address And Ssid

    SSID are changed, IPSU cannot change them again (see the “Using an Internet browser” section on page 3-6 or the “Using a Terminal Emulator” section on page 3-9.) Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 39 You cannot set the SSID without also setting the IP address. However, you can set the IP address without setting the SSID. Click Set Parameters to change the access point’s IP address and SSID settings. Step 6 Click Exit to exit IPSU. Step 7 Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 40: Entering Basic Settings

    Step 3 easy to identify the access point on your network. The default system name is AIR-AP1200-xxxxxx, where xxxxxx is the last 6 digits of the access point MAC address. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 41 Site Survey Client—A station with a wireless connection to an access point. Use this setting for – diagnostics, such as when you need to test the access point by having it communicate with another access point. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 42 Custom link to go to the AP Radio Hardware page. To automatically configure the access point to be compatible with other devices on your wireless LAN, select an Ensure Compatibility With option: 2-Mbps clients—Select this setting if your network contains Cisco Aironet devices that operate – at 2 Mbps.

  • Page 43: Using A Terminal Emulator

    Click OK to set your configuration changes and the Setup page appears. Your basic configuration is Step 11 complete, you can close your internet browser. For additional information on security options, refer to the Cisco Aironet 1200 Series Access Point Software Configuration Guide. Using a Terminal Emulator This section provides instructions for using the console port and Microsoft’s HyperTerminal to set basic...
  • Page 44 Type b to select BOOTP and press Enter after you make your selection. • Type d to select DHCP and press Enter after you make your selection. • Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 3-10 OL-7043-02...
  • Page 45 – you enter on the AP Radio Hardware page. For additional information on the AP Radio Hardware page, refer to the Cisco Aironet 1200 Series Access Point Software Configuration Guide. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02...
  • Page 46 Type ap and press Enter to apply your basic settings. Your basic configuration is complete, you can Step 14 close your terminal emulator. For additional information on security options, refer to the Cisco Aironet 1200 Series Access Point Software Configuration Guide. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02...

  • Page 47: Default Basic Settings

    AP Radio: Module (5-GHz radio) SSID tsunami Role in Radio Network Root Access Point Optimize Radio Network For Throughput Ensure Compatibility With (none selected) SNMP Admin. Community (blank) Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 3-13 OL-7043-02...
  • Page 48 Chapter 3 Basic Configuration Default Basic Settings Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 3-14 OL-7043-02...

  • Page 49: Chapter 4 Mounting Instructions

    Mounting on a Suspended Ceiling, page 4-4 • • Attaching the Access Point to the Mounting Bracket, page 4-5 Securing the Access Point to the Mounting Bracket, page 4-5 • Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 50: Overview

    Section 300-22(C) of the National Electrical Code (NEC), such as above suspended ceilings. If you plan to mount the access point with the 5-GHz radio in environmental air space, Cisco Note recommends that you mount the access point horizontally with its antennas pointing down.

  • Page 51: Mounting On A Horizontal Or Vertical Surface

    Attach the access point to the mounting bracket. Step 5 You can make your installation more secure by mounting it to a stud or major structural member Note and using the appropriate fasteners. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 52: Mounting On A Suspended Ceiling

    You should review Figure 4-2 before beginning the mounting process. Figure 4-2 Mounting Bracket Parts Suspended ceiling T-rail Mounting bracket Caddy fastener Keps nut (contains an attached lock washer) Plastic spacer Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 53: Attaching The Access Point To The Mounting Bracket

    When the access point is properly installed on the mounting bracket, the holes in the security hasps line up so you can install a padlock. Known compatible padlocks are Master Lock models 120T or 121T. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 54 Chapter 4 Mounting Instructions Securing the Access Point to the Mounting Bracket Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 55 • Opening the Access Cover, page 5-3 Removing a Blank Spacer Card, page 5-4 • • Removing a 2.4-GHz Radio, page 5-5 Installing a 2.4-GHz Radio, page 5-7 • Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 56: Chapter 5 2.4-Ghz Radio Upgrade

    Close the access point 2.4-GHz radio access cover. • ESD can damage the Cisco Aironet radio and the internal components of the access point. It is Caution recommended that the 2.4-GHz radio upgrade procedures be performed by an ESD-trained service technician at an ESD-protected workstation.

  • Page 57: Opening The Access Cover

    If your access point was not configured with a 2.4-GHz radio, go to the “Removing a Blank Spacer Card” section. If you are replacing an existing 2.4-GHz radio, go to the “Removing a 2.4-GHz Radio” section. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 58: Removing A Blank Spacer Card

    Antenna connector (black wire) Antenna connector (white wire) Carefully bend the card near the slots in opposite directions to provide enough clearance to remove the Step 2 antenna wires. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 59: Removing A 2.4-Ghz Radio

    The antenna connectors can be damaged by using a pair of long-nose pliers during the removal Caution process. To avoid damaging the antenna wire assemblies, handle them by their connectors. Caution Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 60 Remove the 2.4-GHz card from the mini-PCI connector. Place the removed 2.4GHz radio card into an anti-static bag. Step 3 For instructions on installing a new radio card, go to the “Installing a 2.4-GHz Radio” section. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 61: Installing A 2.4-Ghz Radio

    The internal access point components and the 2.4-GHz radio can be damaged by ESD from improper Caution handling. Carefully remove the Cisco Aironet 2.4-GHz radio card from its anti-static bag. Step 1 Grasp the radio card only on the edges, being careful not to touch components on the board or the gold Step 2 connector pins.
  • Page 62 The radio card installation is now complete. To configure the 2.4-GHz radio card with your wireless network settings refer to the Cisco Aironet 1200 Series Access Point Software Configuration Guide. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02...
  • Page 63 Overview, page 6-2 • Removing the 5-GHz Radio Access Cover, page 6-2 • • Removing a 5-GHz Radio Module, page 6-3 Installing a 5-GHz Radio Module, page 6-5 • Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 64: Chapter 6 5-Ghz Radio Module Upgrade

    A T-10 tamper-resistant Torx L-wrench • A 5-GHz radio product compliance label If anything is missing or damaged, contact your Cisco representative for support. Removing the 5-GHz Radio Access Cover To remove the 5-GHz radio access cover, follow the instructions below: Remove all cables and power connections from the access point.

  • Page 65: Removing A 5-Ghz Radio Module

    5-GHz Radio Module Mounting screws Access point 5-GHz radio module antenna Do not attempt to remove the mounting screws from the module; they are captured in the module Note housing. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 66 Figure 6-3). Figure 6-3 Removing the 5-GHz Radio Module Fold the antenna down (towards the attached radio card) and insert the module into a static protected bag. Step 5 Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 67: Installing A 5-Ghz Radio Module

    Access point Access point card-bus slot 5-GHz radio module antenna 5-GHz radio card Push the 5-GHz radio module into the slot until you hear a slight click. Step 4 Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 68 Carefully attach the label in the space provided below the product compliance label (see Figure 6-6). Step 7 Figure 6-6 5-GHz Radio Product Compliance Label 5-GHz radio product compliance label Access point product compliance label Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 69 The 5-GHz radio module installation is now complete. To configure the 5-GHz radio with your wireless network settings refer to Chapter 3, “Basic Configuration,” and to the Cisco Aironet 1200 Series Access Point Software Configuration Guide. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 70 Chapter 6 5-GHz Radio Module Upgrade Installing a 5-GHz Radio Module Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 71: Troubleshooting

    Cisco Aironet 1200 Series Access Point Software Configuration Guide. For the most up-to-date troubleshooting information, refer to the Cisco TAC website at the following URL (select Top Issues and then select Wireless Technologies): http://www.cisco.com/tac...

  • Page 72: Chapter 7 Troubleshooting

    The Radio and Status indicators are used for both 2.4-GHz and 5-GHz radio operation. Note Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 73: Checking Basic Settings

    The wireless clients attempting to associate with the access point must use the same SSID as the access point. The default SSID is tsunami for both the 2.4-GHz and 5-GHz radios. The dual-mode access point can support different SSIDs for the 2.4-GHz and 5-GHz radios. Note Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 74: Wep Keys

    The access point does not need to use Key 3 as its transmit key, however. Refer to the Cisco Aironet 1200 Series Access Point Software Configuration Guide for instructions on setting the access point’s WEP keys.
  • Page 75 2-minute period, reboot the access point again. After the access point reboots and the Express Setup screen appears, reconfigure the access point by Step 10 using the terminal emulator or an Internet browser. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 76 Chapter 7 Troubleshooting Resetting to the Default Configuration Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 77: Appendix

    Explosive Device Proximity Warning, page A-3 • Installation and Grounding Warning, page A-4 • • Lightning Activity Warning, page A-6 Installation Warning, page A-7 • • Circuit Breaker (15A) Warning, page A-8 Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 78: Appendix A Translated Safety Warning

    Comunicaciones (FCC) es preciso ubicar las antenas dipolo a un mínimo de 20 cm (7,9 pulgadas) o más del cuerpo de las personas. Varning! För att följa FCC-exponeringsgränserna för radiofrekvens (RF), bör dipolsantenner placeras på minst 20 cm avstånd från alla människor. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 79: Explosive Device Proximity Warning

    Varning! Använd inte den trådlösa nätverksenheten i närheten av oskyddade tändhattar eller i en explosiv miljö om inte enheten modifierats för att kunna användas i sådana sammanhang. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 80: Installation And Grounding Warning

    Per un’accurata installazione e sistemazione al suolo dell’antenna, fare riferimento ai codici nazionali e locali (es. U.S.A.: NFPA 70, Codice Elettrico Nazionale, Articolo 810, Canada: Codice Elettrico Canadese, Sezione 54). Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 81 För riktig installation och jordning av antennen, undersök landets and den lokala omgivningens koder (t.ex. U.S.: NFPA 70, National Electrical Code, Article 810, Canada: Canadian Electrical Code, Section 54). Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 82: Lightning Activity Warning

    No operar el sistema ni conectar o desconectar cables durante el transcurso de descargas eléctricas en la atmósfera. Varning! Vid åska skall du aldrig utföra arbete på systemet eller ansluta eller koppla loss kablar. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 83: Installation Warning

    Leia as instruções de instalação antes de ligar o sistema à sua fonte de energia. ¡Advertencia! Ver las instrucciones de instalación antes de conectar el sistema a la red de alimentación. Varning! Läs installationsanvisningarna innan du kopplar systemet till dess strömförsörjningsenhet. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 84: Circuit Breaker (15A) Warning

    Denna produkt är beroende av i byggnaden installerat kortslutningsskydd (överströmsskydd). Kontrollera att säkring eller överspänningsskydd används på fasledarna (samtliga strömförande ledare) för internationellt bruk max. 240 V växelström, 10 A (i USA max. 120 V växelström, 15 A). Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 85: Appendix

    A P P E N D I X Declarations of Conformity and Regulatory Information This appendix provides declarations of conformity and regulatory information for the Cisco Aironet 1200 Series Access Points. This appendix contains the following sections: • Manufacturers Federal Communication Commission Declaration of Conformity Statement Department of Communications—Canada...

  • Page 86: Manufacturers Federal Communication Commission Declaration Of Conformity Statement

    Table B-1. Any changes or modification to the product not expressly approved by Cisco could void the user’s authority to operate this device. Caution Within the 5.15-5.25 GHz band (5 GHz radio channels 34-48) the U-NII devices are restricted to indoor operations to reduce any potential for harmful interference to co-channel Mobile Satellite System (MSS) operations.

  • Page 87: Department Of Communications-Canada

    This device must accept any interference received, including interference that may cause undesired operation. Cisco Aironet 11-Mbps, 2.4-GHz Access Points are certified to the requirements of RSS-139-1 and RSS-210 for 2.4-GHz spread spectrum devices, and Cisco Aironet 54-Mbps, 5-GHz Access Points are certified to the requirements of RSS-210 for 5-GHz spread spectrum devices.The use of this device in a...

  • Page 88: European Community, Switzerland, Norway, Iceland, And Liechtenstein

    Tämä laite täyttää direktiivin 1999/5/EY oleelliset vaatimukset ja on siinä asetettujen muidenkin ehtojen mukainen. Svenska: Denna utrustning är i överensstämmelse med de väsentliga kraven och andra relevanta bestämmelser i Direktiv 1999/5/EC. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 89 European community and other countries that have adopted the European R&TTE directive 1999/5/EC or the CEPT recommendation Rec 70.03 or both. For more details on legal combinations of power levels and antennas, refer to the Cisco Aironet 1200 Series Access Point Software Configuration Guide.

  • Page 90: Declaration Of Conformity For Rf Exposure

    Dual antennas used for diversity operation are not considered co-located. Note Guidelines for Operating Cisco Aironet Access Points in Japan This section provides guidelines for avoiding interference when operating Cisco Aironet access points in Japan. These guidelines are provided in both Japanese and English. Japanese Translation...

  • Page 91: English Translation

    If this equipment causes RF interference to a specified low-power radio station of RF-ID, contact the number below. Contact Number: 03-5549-6500 Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 92 Appendix B Declarations of Conformity and Regulatory Information Guidelines for Operating Cisco Aironet Access Points in Japan Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 93: Appendix

    This appendix identifies the pinouts for the serial console cable that connects to the access point’s serial console port. The appendix contains the following sections: Overview, page C-2 Console Port Signals and Pinouts, page C-2 Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 94: Overview

    The access point requires a special serial cable that connects the access point serial console port (RJ-45 connector) to your PC’s COM port (DB-9 connector). This cable can be purchased from Cisco (part number AIR-CONCAB1200) or can be built using the pinouts in this appendix.

  • Page 95: Appendix

    The following topics are covered in this appendix: Channels, page D-2 • • Maximum Power Levels and Antenna Gains, page D-4 Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 96: Ieee 802.11B (2.4 Ghz Band

    9 through 13 can be used indoors and outdoors. Users are responsible for ensuring that the channel set configuration is in compliance with the regulatory standards of Mexico. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 97: Channels D

    5210 5220 5230 5240 5260 5280 5300 5320 All channel sets are restricted to indoor usage, except the Americas (-A) allows for indoor and outdoor use on channels 52-64. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 98 Regulatory Domain Antenna Gain (dBi) Maximum Power Level (mW) Americas (-A) (4 watts EIRP maximum) 13.5 EMEA (-E) (100 mW EIRP maximum) 13.5 Japan (-J) (10 mW/MHz EIRP maximum) 13.5 Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...

  • Page 99: Ieee 802.11A (5-Ghz Band

    (EIRP) above the amount allowed per regulatory domain. Table D-4 indicates the maximum power levels allowed with the Cisco integrated antenna for each regulatory domain. Table D-4 Maximum Power Levels Per Antenna Gain for IEEE 802.11a Maximum Power Level (mW)
  • Page 100 Appendix D Channels and Antenna Settings Maximum Power Levels and Antenna Gains Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 OL-7043-02...
  • Page 101 A modulation technique used by IEEE 802.11b-compliant wireless LANs for BPSK transmission at 1 Mbps. A single data message (packet) sent to all addresses on the same subnet. Broadcast Packet Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 GL-1 OL-7043-02...
  • Page 102 The server maintains a database of host alphanumeric names and their corresponding IP addresses. Direct sequence spread spectrum. A type of spread spectrum radio transmission DSSS that spreads its signal continuously over a wide frequency band. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 GL-2 OL-7043-02...
  • Page 103 This number is expressed in a form similar to an IP address; for example: 255.255.255.0. An antenna that radiates its signal 360 degrees both vertically and horizontally Isotropic in a perfect sphere. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 GL-3 OL-7043-02...
  • Page 104 Range A measurement of the weakest signal a receiver can receive and still correctly Receiver Sensitivity translate it into data. Radio frequency. A generic term for radio-based technology. Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 GL-4 OL-7043-02...
  • Page 105 A feature of some Access Points that allows users to move through a facility Roaming while maintaining an unbroken connection to the LAN. A connector type unique to Cisco Aironet radios and antennas. Part 15.203 of RP-TNC the FCC rules covering spread spectrum devices limits the types of antennas that may be used with transmission equipment.
  • Page 106 Glossary Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 GL-6 OL-7043-02...

  • Page 107: I N D E X

    FCC Safety Compliance connecting cables fire resistance 2-10 connectors frequencies 1-4, 1-10, 1-11, 3-9 D-2, D-3 console port 1-4, 3-9, C-2 frequency range 1-10 conventions, document viii coverage, minimal overlap Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 IN-1 OL-7043-02...
  • Page 108 1-10 cable 1-4, 3-9, C-2 optimize radio network 3-8, 3-11, 3-12 Cisco cable 7-4, C-2 connecting cable Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 IN-2 OL-7043-02...
  • Page 109 3-13 temperature operating 1-10 storage 1-10 terminal emulator 3-2, 3-9 terminal type 3-13 throughput 3-8, 3-11, 3-12 troubleshooting Unlicensed National Information Infrastructure (UNII) unpacking voltage range 1-10 Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 IN-3 OL-7043-02...
  • Page 110 Index Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02 IN-4 OL-7043-02...

This manual is also suitable for:

Air-rm20a-a-k9

Table of Contents