Table of Contents
Advertisement
Offline DM Verification of the Boot Configuration Record and Disk
Offline DM Verification of the Boot Configuration
Record and Disk
Note
CSS 11501 Boot and Verification
Cisco Content Services Switch Getting Started Guide
A-6
During the Offline DM verification phase, the CSS checks the configuration
record and initializes the disk. If the CSS detects any errors in the configuration
record, a failed message appears along with information on the configuration
parameter in question. The problems may include a misconfigured IP and subnet
address, or there is no primary or secondary boot record. The CSS does not
continue the boot process until the problem is resolved.
If a failed message occurs:
Enter the Offline DM menu and display your current configuration record.
1.
Refer to the Cisco Content Services Switch Administration Guide for detailed
information on using Offline DM.
Reconfigure the CSS boot record configuration.
2.
Reboot the CSS.
3.
If a MAC address error occurs, contact TAC for technical assistance.
After the CSS confirms a valid configuration record, it initializes the disk in
slot 0. If the disk cannot initialize, the CSS indicates that it has failed. If an
initialization problem occurs:
Enter the Offline DM menu.
1.
Select the option 3 from the Disk Options menu.
2.
Perform a check disk on the disk in slot 0. If necessary, reformat the disk.
3.
Reboot the CSS. If the failure is not resolved, contact TAC for technical
4.
assistance.
After the CSS 11501 completes the Offline DM boot process, the CSS displays
the login banner and starts the Online Diagnostic Monitor (OnDM). During
OnDM, the CSS 11501 downloads software to each component and verifies that
each component is functioning.
Appendix A
Troubleshooting the Boot Process
OL-6037-01
Hide quick links:
Advertisement
Table of Contents
