Table of Contents
Advertisement
Diagnostic Tests for Hardware and Error Messages
Table A-1
Field
Failure_type
Maj_Error_id
Min_Error_id
Test_reference
Cisco Content Services Switch Getting Started Guide
A-4
Fields in the Diagnostic Monitor Error Message (continued)
Description
One of four types of failure, Hardware/Fatal,
Hardware/Non-Fatal, Software/Fatal, and
Software/Non-Fatal.
Fatal errors indicate that a CSS 11501 component or a
•
specific module in the CSS 11503 or CSS 11506 cannot
perform its intended function.
Non-Fatal errors indicate that a CSS 11501 component or
•
a specific module in the CSS 11503 or CSS 11506 is
capable of performing its intended function despite the
errors, but you should repair the problem as soon as
possible.
In the case of fatal and non-fatal errors with the CSS 11501,
contact TAC for technical assistance.
In the case of fatal and non-fatal errors with the CSS 11503
or CSS 11506:
Power down the CSS when the CSS completes the boot
1.
process.
Reseat the failed module.
2.
Power up the CSS.
3.
If reseating the module does not correct the failure,
contact the TAC for technical assistance.
The single reference number that points to a particular
sub-function in the CSS 11501 chassis or a specific module
in the CSS 11503 or CSS 11506.
The sub-reference number that points to a particular
verification step within the sub-function.
The test number associated with a particular test.
Appendix A
Troubleshooting the Boot Process
OL-6037-01
Hide quick links:
Advertisement
Table of Contents
