Table of Contents
Advertisement
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Table 4-9
Line Settings Menu Options (continued)
Option
Description
Longer
Displays the name used by the phone for authentication if a
Authentication
registration is challenged by the call control server during
Name
initialization.
The length of the SIP digest authentication name has been increased
to 128 characters for Cisco Unified 7900 Series SIP phones. The
authentication name is used to verify that the phone is allowed to
send SIP messages (REGISTER, INVITE, and SUBSCRIBE) to the
Cisco Unified CM.
Display Name
Displays the identification the phone uses for display for caller
identification purposes.
Proxy Address
Displays the IP address of the proxy server that will be used by the
phone. The value is left blank because it is not applicable to SIP
phones that are using Cisco Unified Communications Manager.
Proxy Port
The value is left blank because it is not applicable to SIP phones
that are using Cisco Unified Communications Manager.
Shared Line
Displays if the line is part of a shared line (Yes) or not (No).
Related Topics
•
•
Call Preferences Menu for SIP Phones
The Call Preferences menu displays settings that relate to the settings for the call preferences on the SIP
phone.
Table 4-10
Call Preferences Menu Options
Option
Caller ID Blocking
Anonymous Call Block
Call Waiting Preferences
Call Hold Ringback
OL-21011-01
Displaying a Configuration Menu, page 4-2
Device Configuration Menu, page 4-17
Table 4-10
describes the options in this menu.
Description
Indicates whether caller ID blocking is enabled
(Yes) or disabled (No) for the phone.
Indicates whether anonymous call block is enabled
(Yes) or disabled (No) for the phone.
Displays a sub-menu that indicates whether call
waiting is enabled (Yes) or disabled (No) for each
line.
Indicates whether the call hold ringback feature is
enabled (Yes) or disabled (No) for the phone.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
Device Configuration Menu
To Change
Use Cisco Unified
Communications Manager
Administration to modify.
Use Cisco Unified
Communications Manager
Administration to modify.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
To Change
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
Use Cisco Unified Communications
Manager Administration to modify.
From Cisco Unified Communications
Manager Administration, choose Device >
Device Settings > SIP Profile.
4-21
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
