Power Save Configuration Menu - Cisco 7970G - IP Phone VoIP Administration Manual
For cisco unified communications manager 6.1 (sccp and sip)
Hide thumbs
Also See for 7970G - IP Phone VoIP:
- Administration manual (275 pages) ,
- Phone manual (98 pages) ,
- User manual (21 pages)
Table of Contents
Advertisement
Device Configuration Menu
Table 4-12
Media Configuration Menu Options (continued)
Option
Enterprise
Advertise G.722
Codec
Device Advertise
G.722 Codec
Power Save Configuration Menu
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1
4-36
Description
Enables/disables Cisco Unified IP
Phones to advertise the G.722 codec to
Cisco Unified Communications
Manager. If enabled (default), and if
each endpoint in the attempted call
supports G.722 in its capabilities set,
Cisco Unified Communications
Manager will choose G.722 for the call.
When a phone is registered
Note
with a Cisco Unified
Communications Manager that
does not support this setting,
the default is "Disabled."
Allows you to override the Enterprise
Advertise G.722 Codec on a per-phone
basis.
The default is "Use System Default,"
which means the value configured for
the Enterprise Advertise G.722 Codec
parameter gets used.
The Power Save Configuration menu displays the settings that control when the
LCD screen on a phone turns off to conserve power.
options on this menu.
For detailed information about configuring these settings, see the
Disabling the Cisco Unified IP Phone Touchscreen" section on page
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
To Change
Use Cisco Unified Communications
Manager Administration and choose
System > Enterprise Parameters.
Use Cisco Unified Communications
Manager Administration and choose
Device > Phone.
Table 4-13
describes the
"Automatically
6-11.
OL-14626-01
Advertisement
Chapters
Table of Contents
Troubleshooting
