Cisco WS-C3560E-24PD-E Command Reference Manual page 733

Catalyst 3560 series switch

Table of Contents

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands

This example shows how to place the switch in VTP transparent mode:

Switch(vlan)# vtp transparent

Setting device to VTP TRANSPARENT mode.

This example shows how to set the administrative domain for the switch:

Switch(vlan)# vtp domain OurDomainName

Changing VTP domain name from cisco to OurDomainName

This example shows how to configure the VTP domain password:

Switch(vlan)# vtp password private

Setting device VLAN database password to private.

This example shows how to enable pruning in the proposed new VLAN database:

Switch(vlan)# vtp pruning

Pruning switched ON

This example shows how to enable v2 mode in the proposed new VLAN database:

Switch(vlan)# vtp v2-mode

V2 mode enabled.

You can verify your settings by entering the show vtp status privileged EXEC command.

Related Commands

switchport trunk

configuration)

Displays the VTP statistics for the switch and general information about the

VTP management domain status.

Configures the VLAN pruning-eligible list for ports in trunking mode.

Configures the VTP filename, interface, domain name, and mode.

vtp (VLAN configuration)

Catalyst 3560 Switch Command Reference

Show Quick Links

Table of Contents