Cisco WS-C3560E-24PD-E Command Reference Manual page 374

Catalyst 3560 series switch

Table of Contents

cluster enable cluster-name

Use this configuration? [yes/no]: yes

[0] Go to the IOS command prompt without saving this config.

[1] Return back to the setup without saving this config.

[2] Save this configuration to nvram and exit.

Enter your selection [2]:

Related Commands

show running-config

show version

Catalyst 3560 Switch Command Reference

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands

Displays the running configuration on the switch. For syntax

information, select Cisco IOS Configuration Fundamentals

Command Reference, Release 12.2 > File Management Commands

> Configuration File Management Commands.

Displays version information for the hardware and firmware.

Show Quick Links

Table of Contents