Table of Contents
Advertisement
Chapter 3
Configuring the Telephony Settings on the VG248
Disabling Cisco Fax Relay
Step 1
Step 2
Step 3
Step 4
Reverting to Previous Configuration
Step 1
Step 2
OL-1209-02
The VG248 supports Cisco fax relay. Cisco fax relay provides a more reliable
method of transporting fax data over the IP network rather than sending the fax
information as a voice call. However, the terminating device must also support
Cisco fax relay.
By default, Cisco fax relay is enabled on the VG248. However, follow these steps
to disable it:
From the main menu, choose Configure.
Choose Telephony.
Choose Fax relay.
Choose one of the following:
•
Enabled
Disabled
•
By default, the VG48 ports identify their configuration using TFTP. This
configuration determines the Cisco CallManager system to which these ports
connect.
If persistent TFTP problems prevent the VG248 from retrieving this
configuration, the VG248 ports can revert to their previous configuration. This
enables the ports to connect to the Cisco CallManager system with which they
were previously registered.
By default, the VG248 automatically reverts to the previous configuration if the
ports fail to connect via TFTP. To disable this functionality, follow these steps:
From the main menu, choose Configure.
Choose Telephony.
Cisco VG248 Analog Phone Gateway Software Configuration Guide
Disabling Cisco Fax Relay
3-3
- Quick Links:
- Accessing Configuration Options
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
