Table of Contents
Advertisement
Configuring Voice
Configuring Voice Settings
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
Resync Trigger 1
Resync Trigger 2
Resync Fails On FNF
Profile Rule
Profile Rule B:
Profile Rule C:
Profile Rule D:
Profile Name and
Profile Region
Log Resync
Request Msg
Configurable resync trigger conditions. A resync is
triggered when the logic equation in these parameters
evaluates to TRUE.
The default is (empty).
Determines whether a file-not-found response from the
provisioning server constitutes a successful or a failed
resync. A failed resync activates the error resync timer.
The default is Yes.
This parameter is a profile script that evaluates to the
provisioning resync command. The command is a TCP/
IP operation and an associated URL. The TCP/IP
operation can be TFTP, HTTP, or HTTPS.
If the command is not specified, TFTP is assumed, and
the address of the TFTP server is obtained through
DHCP option 66. In the URL, either the IP address or the
FQDN of the server can be specified. The file name can
have macros, such as $MA, which expands to the device
MAC address.
The default is /srp$PSN.cfg.
Defines second, third, and fourth resync commands and
associated profile URLs. These profile scripts are
executed sequentially after the primary Profile Rule
resync operation has completed. If a resync is triggered
and Profile Rule is blank, Profile Rule B, C, and D are still
evaluated and executed.
The default is (empty).
A provisioning server can store string data in this
parameter, and subsequently read this data back when
querying the device. It performs no other internal
function.
This parameter contains the message that is sent to the
Syslog server at the start of a resync attempt.
The default is $PN $MAC – Requesting resync
$SCHEME://$SERVIP:$PORT$PATH.
6
133
Hide quick links:
Advertisement
Table of Contents
