Table of Contents
Advertisement
Trouble with threads and stitches
Before calling for service, check the following items. If the problem still persists, contact the place of
purchase or your nearest Brother dealer.
Symptom
1. Upper thread breaks
2. Bobbin thread breaks
3. Skipped stitches
4. Fabric puckers
5. Inability to thread needle
6. Inability for thread tension control
166
Probable cause
1. Upper threading is not correct.
2. Upper thread is entangled.
3. Spool of thread is not correctly set.
4. Correct needle is not used.
5. Shuttle is damaged.
1. Upper thread is entangled.
2. Bobbin is not threaded properly in the
shuttle.
1. Needle is not correctly inserted.
2. Correct needle is not used.
3. The combination of fabric, thread and
needle is not correct.
4. Dust is clinging under the needle plate.
5. Upper threading is not correct.
1. Threading is not correct
2. Correct needle is not used.
3. Combination of fabric, thread and
needle is not correct.
4. Check if thread tension is set at
"AUTO" position,
1. Needle position is not collect.
2. Hook of needle threader does not fit
into the eye of the needle.
1. Upper threading is not correct.
2. Set of bobbin thread is not correct.
3. Combination of fabric, thread and
needle is not correct.
4. Check if the thread tension is set at
"AUTO" position.
Remedy
1. Re-thread upper thread.
2. Remove thread ends in the race or
shuttle.
3. Set spool of thread correctly.
4. Change to proper needle.
5. Contact service center.
1. Remove thread ends in the race or
inner shuttle.
2. Set bobbin properly and pull out the
bobbin thread.
1. Insert needle properly.
2. Change to proper needle.
3. Check the "RELATED CHART OF
SEWING FABRICS, THREAD AND
NEEDLE" on page 157.
4. Remove dust by cleaning with a brush.
5. Re-thread upper thread.
1. Re-thread upper and bobbin thread
correctly.
2. Change to proper needle.
3. Check "RELATED CHART OF
SEWING FABRICS, THREAD AND
NEEDLE" on page 157.
4. Refer to "THREAD TENSION" on page
27.
1. Set needle at proper position using
"NEEDLE POSITION" button.
2. Set needle at proper position using
"NEEDLE POSITION" button.
1. Re-thread upper thread.
2. Set bobbin properly and pull out the
bobbin thread.
3. Check "RELATED CHART OF
SEWING FABRICS, THREAD AND
NEEDLE" on page 157.
4. Refer to "THREAD TENSION" on page
27.
- Quick Links:
- Principal Parts
Hide quick links:
Advertisement
Table of Contents
