Table of Contents
Advertisement
SC-F1000 Series
User's Guide
c
Important:
Make sure you pull the cap section out of the
hole in the cardboard. If the cap is opened
without being pulled out, the pre-treatment
liquid may spill out.
C
Remove the cap.
D
Remove the tap from the bag and check that the
hole is visible.
If you cannot see the hole, turn the tap's handle
section until the hole is visible.
Note:
If you cannot see the hole or if the tap is damaged,
contact the store where you purchased the
product.
E
Attach the tap.
Basic Printing
Pouring
A
Remove the cap from the tap, and then turn the
lever until the hole is facing down.
B
Tip the cardboard or the container and pour
the pre-treatment liquid into the target
container.
C
When you have finished pouring liquid, reverse
the steps in step 1 to put the cap for the tap
back on the tap.
D
Make sure you keep the mouth of the tap facing
up as shown in the illustration.
Filtering the cotton
pre-treatment liquid (only
when coagulation occurs)
During storage, the cotton pre-treatment liquid may
develop a white coagulation as shown in the image.
46
Advertisement
Table of Contents
