Table of Contents
Advertisement
SC-F1000 Series
User's Guide
G
Press Enter Password and enter the password.
Note:
❏ Differentiate between uppercase and
lowercase when entering the password.
❏ If the SSID was entered directly, set Password
to Available before entering the password.
H
When input is finished, press OK.
I
Check the settings and then press Start Setup.
J
Press OK to finish the procedure.
If the connection fails, select Connection
Check. You can check the action to take on the
screen.
"Checking the Network Connection Status"
U
on page 35
K
Close the Network Connection Settings screen.
Directly Connecting
Wirelessly (Wi-Fi Direct)
A direct connection with the printer can be
established temporarily when, for example, the printer
is not connected to a network or you do not have
permission to log on to the network.
Wi-Fi Direct is disabled by default. The following
describes the procedure from enabling Wi-Fi Direct to
connecting.
Note:
The printer can connect with up to eight computers at
the same time. If you want to connect another device
when there are already eight devices connected,
disconnect the connection to the printer from a device
that is already connected.
Changing the Network Connection Methods
34
A
Press
on the Home screen.
Note:
The shape and color of the icon differ depending
on the connection status.
"Understanding and Operating the Display"
U
on page 14
B
Press Wi-Fi Direct.
When Wi-Fi Direct is already enabled, the
network (SSID), password, number of
connected devices, and so on are displayed. Go
to step 5.
Note:
If a part of the displayed network (SSID) or device
name, and so on cannot be seen because it is cut
off at the right edge of the screen, press the
corresponding item to display the entire setting
value.
C
Press Start Setup.
D
Press Connect to Computer.
E
Press Start Setup.
Wi-Fi Direct is enabled, and the network
(SSID) and password are displayed.
F
Open the Wi-Fi setting screen on the device
you want to connect with the printer, select the
SSID displayed on the screen of the printer, and
enter the password just as it is displayed on the
screen.
G
When a connection is established, press
Complete to finish the procedure.
H
Press Close on the screen of the printer to close
the network connection settings screen.
When Garment Creator 2 is installed on the
connected device, you can print using Garment
Creator 2.
Advertisement
Table of Contents
