hit counter script
Download
Share
Print this page
Toro Groundsmaster e3200 Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Lawn Mower Accessories
  5. Groundsmaster e3200
  6. Installation instructions manual

Toro Groundsmaster e3200 Installation Instructions Manual

Traction unit with 60in side discharge rotary mower
Hide thumbs Also See for Groundsmaster e3200:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Recycler Kit
Groundsmaster
Rotary Mower
Model No. 32319
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface.
2.
Engage the parking brake.
3.
Raise the mower deck to the T
position; refer to your Operator's Manual.
4.
Shut off the engine and remove the key.
5.
Turn the battery-disconnect switch to the O
position; refer to the traction unit Operator's
Manual.
6.
Rotate the mower deck to the S
refer to your Operator's Manual.
© 2023—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
e3200 Traction Unit with 60in Side Discharge
Removing the Standard
Blades
No Parts Required
Procedure
RANSPORT
FF
position;
ERVICE
Register at www.Toro.com.
2
1.
Place a wrench on the flat of the blade retainer
or hold the blade end using a rag or thickly
padded glove.
2.
Remove the blade bolt, washer, and blade from
the spindle shaft.
Important:
Retain the parts for later
installation.
Figure 1
1. Blade retainer
2. Standard blade
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Form No. 3464-802 Rev A
Installation Instructions
3. Washer
4. Blade bolt
*3464-802*
g376322

Advertisement

loading

Related Manuals for Toro Groundsmaster e3200

Summary of Contents for Toro Groundsmaster e3200

  • Page 1 Operator’s Manual. g376322 Figure 1 1. Blade retainer 3. Washer 2. Standard blade 4. Blade bolt *3464-802* © 2023—The Toro® Company Original Instructions (EN) Register at www.Toro.com. 8111 Lyndale Avenue South Printed in the USA Bloomington, MN 55420 All Rights Reserved...
  • Page 2 Removing the Existing Baffles No Parts Required Procedure Note: In the steps below, the bolts are threaded into the mower deck. Remove the nuts before removing the bolts. Remove the 2 flange nuts that secure the baffles in place (Figure Remove the 2 bolts and 2 nuts from the adjustable flow baffle (Figure Remove the 3 bolts and 3 nuts that secure the baffles in place...
  • Page 3 Installing the Discharge Installing the Recycler Cover Plate Baffles Parts needed for this procedure: Parts needed for this procedure: Discharge cover plate Left baffle Carriage bolt (5/16 x 7/8 inch) Center baffle Flange nut (5/16 inch) Right baffle Carriage bolt (3/8 x 1-1/4 inches) Carriage bolt (3/8 x 1 inch) Locknut (3/8 inch) Locknut (3/8 inch)
  • Page 4 g455052 Figure 4 1. Right baffle 4. Carriage bolt (3/8 x 1 inch) 2. Center baffle 5. Locknut (3/8 inch) 3. Left baffle...
  • Page 5 Installing the Recycler Tightening the Fasteners Blades No Parts Required No Parts Required Procedure Procedure WARNING Install the recycler blade, washer, and blade bolt and When servicing the blade, the blade can still tighten the blade bolt to 68 to 81 N∙m (50 to 60 ft-lb) move even though the power source is off.
  • Page 6 Converting Back to Side Discharge No Parts Required Procedure Park the machine on a level surface. Engage the parking brake. Raise the mower deck to the T RANSPORT position; refer to your Operator’s Manual. Shut off the engine and remove the key. Rotate the mower deck to the S position;...
  • Page 7 Notes:...

This manual is also suitable for:

32319