Table of Contents
Advertisement
NOTICE
Storage
The motor can be damaged if you use it or store it unprotected outdoors.
• Protect the motor against intensive solar radiation, rain, snow, ice and dust. Use a
• If required, contact the Service Center (Page 12) and/or technically coordinate outdoor
4.5.4
Securing the rotor
Depending on the version, the machine is fitted with a rotor shipping brace. This protects the
bearings against damage due to shock and vibration during transport or storage.
NOTICE
Motor damage due to vibrations
Not using the rotor shipping brace can cause damage to the machine if it is jolted during
transport or storage. Material damage can result.
• If the machine is fitted with a rotor shipping brace, this should always be used when
• Protect the motor against strong radial shocks and vibration when storing, as the rotor
• Do not remove the rotor shipping brace until you are ready to push on the output
• If the customer already has mounted parts, such as a coupling or belt pulley, the
• For machines with a vertical type of construction:
1MB1.33 Eagle Line shaft heights 71 ... 315
Operating Instructions, 08/2023, A5E52990459A
superstructure or additional cover, for example.
use.
transporting the machine. The rotor shipping brace must be attached during the
transport.
shipping brace cannot completely absorb these forces.
element.
bearings can be damaged during transport. In this case, make sure that the customer
uses a rotor shipping brace.
– Do not remove the rotor shipping brace until the machine is in a vertical position.
– If a machine has to be transported in a horizontal position, the rotor must be fixed in
position before the machine is turned onto its side. Vertical machines can be supplied
in the horizontal position from the manufacturing plant.
Preparing for use
4.5 Transport and storage
51
Advertisement
Table of Contents
