Table of Contents
Advertisement
Quick Links
22in Recycler
Model No. 21447—Serial No. 400000000 and Up
Introduction
This rotary-blade, walk-behind lawn mower is intended
to be used by residential homeowners. It is designed
primarily for cutting grass on well-maintained lawns on
residential properties. Using this product for purposes
other than its intended use could prove dangerous to
you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for more information, including
safety tips, training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
© 2021—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Figure 1
Figure 1
Register at www.Toro.com.
Lawn Mower
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order or the engine is constructed,
equipped, and maintained for the prevention of fire.
The enclosed engine owner's manual is supplied
for information regarding the US Environmental
Protection Agency (EPA) and the California Emission
Control Regulation of emission systems, maintenance,
and warranty. Replacements may be ordered through
the engine manufacturer.
Gross or Net Torque: The gross or net torque
of this engine was laboratory rated by the engine
manufacturer in accordance with the Society of
Automotive Engineers (SAE) J1940 or J2723. As
configured to meet safety, emission, and operating
requirements, the actual engine torque on this class
of mower will be significantly lower. Please refer to
the engine manufacturer's information included with
the machine.
g307059
Proposition 65 Warning
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Form No. 3445-597 Rev A
Operator's Manual
Figure 2
Safety-alert symbol
WARNING
CALIFORNIA
*3445-597*
Original Instructions (EN)
Printed in Mexico
All Rights Reserved
g000502
Advertisement
Table of Contents
Related Manuals for Toro Recycler 21447
Summary of Contents for Toro Recycler 21447
-
Page 1: Introduction
Authorized Service The enclosed engine owner's manual is supplied Dealer or Toro Customer Service and have the model for information regarding the US Environmental and serial numbers of your product ready. -
Page 2: Table Of Contents
Contents Safety Introduction ............... 1 This machine has been designed in accordance with Safety ............... 2 ANSI B71.1-2017. General Safety ........... 2 Safety and Instructional Decals ......3 General Safety Setup ................ 4 1 Assembling and Unfolding the Handle....4 This product is capable of amputating hands and 2 Installing the Recoil-Starter Rope in the feet and of throwing objects. -
Page 3: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decaloemmarkt Manufacturer's Mark decal133-8062 133-8062 1. This mark indicates that the blade is identified as a part from the original machine manufacturer. -
Page 4: Setup
Setup Important: Remove and discard the protective plastic sheet that covers the engine and any other plastic or wrapping on the machine. Assembling and Unfolding the Handle No Parts Required Procedure g357078 Figure 3... -
Page 5: Installing The Recoil-Starter Rope In The Rope Guide
Installing the Recoil-Starter Rope in the Rope Guide No Parts Required Procedure Important: To start the engine safely and easily whenever you use the machine, install the recoil-starter rope in the rope guide. g356892 Figure 4... -
Page 6: Adding Oil To The Engine
Adding Oil to the Engine No Parts Required Procedure Important: If the oil level in the engine is too low or too high and you run the engine, you may damage the engine. g235721 Figure 5... -
Page 7: Assembling The Grass Bag
Assembling the Grass Bag No Parts Required Procedure g235791 Figure 6... -
Page 8: Product Overview
Authorized Service Dealer or authorized Toro – If you spill fuel, do not attempt to start the distributor or go to www.Toro.com for a list of all engine. Avoid creating a source of ignition until approved attachments and accessories. -
Page 9: Filling The Fuel Tank
– Keep your hands and face away from the nozzle and the fuel-tank opening. – Keep fuel away from your eyes and skin. Filling the Fuel Tank Type Unleaded gasoline Minimum octane rating 87 (US) or 91 (research octane; outside the US) Ethanol No more than 10% by volume Methanol... -
Page 10: Checking The Engine-Oil Level
Checking the Engine-Oil Level Service Interval: Before each use or daily Important: If the oil level in the crankcase is too low or too high and you run the engine, you may damage the engine. g235721 Figure 9 Adjusting the Handle Height You can raise or lower the handle in 1 of 2 positions that is more comfortable for you. -
Page 11: Adjusting The Cutting Height
Adjusting the Cutting Height DANGER Adjusting the cutting-height levers could bring your hands into contact with a moving blade and result in serious injury. • Shut off the engine and wait for all moving parts to stop before adjusting the cutting height. •... -
Page 12: During Operation
Check the grass catcher components and the machine. Do not engage in any activity that discharge chute frequently for any wear or causes distractions; otherwise, injury or property deterioration and replace them with genuine Toro damage may occur. parts when necessary. •... -
Page 13: Using The Self-Propel Drive
Using the Self-Propel Drive For Self-Propel-Drive Models Only • To engage the self-propel drive, pull the self-propel-drive bar to the handle and hold it (Figure 13). g360886 Figure 13 1. Self-propel-drive bar Note: The maximum self-propel-drive speed is fixed. To reduce the speed, increase the space between the self-propel-drive bar and the handle. -
Page 14: Bagging The Clippings
Bagging the Clippings Use the grass bag when you want to collect grass and leaf clippings from the lawn. Installing the Grass Bag Raise and hold up the rear deflector (A of Figure 14). Install the grass bag, ensuring that the pins on the bag rest in the notches on the handle (B of Figure 14). -
Page 15: Operating Tips
General Safety plug, and examine the machine for damage. • For best performance, install a new Toro blade • Always shut off the machine, wait for all moving before the cutting season begins or when parts to stop, and allow the machine to cool before necessary. -
Page 16: Folding The Handle
When no more clippings come out, stop the Insert the carriage bolt (with the bolt head toward water and move the machine to a dry area. the inside) through the handle bracket and the upper hole in the handle end. Ensure that the Start the engine and run it for a few minutes to square edges of each carriage bolt fits into the dry the underside of the machine to prevent it... -
Page 17: Maintenance
To ensure optimum performance of the machine, Important: Before tipping the machine to use only genuine Toro replacement parts and change the oil or replace the blade, allow the accessories. Replacement parts and accessories fuel tank to run dry through normal usage. If... -
Page 18: Servicing The Air Filter
Servicing the Air Filter Changing the Engine Oil Service Interval: Yearly Service Interval: Yearly Press down on the latch tabs on top of the Note: Run the engine a few minutes before changing air-filter cover (Figure 20). the oil to warm it. Warm oil flows better and carries more contaminants. -
Page 19: Replacing The Blade
Replacing the Blade Service Interval: Yearly Important: You will need a torque wrench to install the blade properly. If you do not have a torque wrench or are uncomfortable performing this procedure, contact an Authorized Service Dealer. Examine the blade whenever you run out of fuel. If the blade is damaged or cracked, replace it immediately. -
Page 20: Storage
Preparing the Machine for Storage On the last refueling of the year, add fuel stabilizer (such as Toro Premium Fuel Treatment) to the fuel as directed on the label. Dispose of any unused fuel properly. Recycle it according to local codes or use it in your automobile. - Page 21 Perform any maintenance procedures; refer to Maintenance (page 17). Check the engine-oil level; refer to Checking the Engine-Oil Level (page 10). Fill the fuel tank with fresh fuel; refer to Filling the Fuel Tank (page Connect the wire to the spark plug.
- Page 22 Notes:...
- Page 23 While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.