Table of Contents
Advertisement
Cisco Webex Room Panorama and Room 70 Panorama
Introduction
Audio Input HDMI [n] VideoAssociation MuteOnInactiveVideo
n: 2..5
Use this setting to decide whether to stop the audio playback of a connected presentation
source if that presentation source is not currently shown on-screen, or to always playback
the audio as long as the presentation source is connected.
Requires user role: ADMIN, INTEGRATOR
Default value: HDMI [2]: Off HDMI [3,4,5]: On
Value space: Off/On
Off: Audio is played, locally and to far end, as long as a presentation source is
connected; you do not have to present the HDMI input source.
On: Audio is played, locally and to far end, only when the connected presentation source
is shown on-screen.
Audio Input Microphone [n] Channel
n: 1..8
Define whether the signal on the microphone input is a mono signal or part of a
multichannel signal.
Requires user role: ADMIN, INTEGRATOR
Default value: Mono
Value space: Left/Mono/Right
Left: The microphone input signal is the left channel of a stereo signal.
Mono: The microphone input signal is a mono signal.
Right: The microphone input signal is the right channel of a stereo signal.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration
Peripherals
Maintenance
Audio Input Microphone [n] EchoControl Mode
n: 1..8
The echo canceller continuously adjusts itself to the audio characteristics of the room, and
compensates for any changes it detects in the audio environment. If the changes in the
audio conditions are significant, the echo canceller may take a second or two to re-adjust.
Requires user role: ADMIN, INTEGRATOR
Default value: On
Value space: Off/On
Off: Turn off the echo control. Recommended if external echo cancellation or playback
equipment is used.
On: Turn on the echo control. Recommended, in general, to prevent the far end from
hearing their own audio. Once selected, echo cancellation is active at all times.
Audio Input Microphone [n] EchoControl Dereverberation
n: 1..8
The video conferencing device has built-in signal processing to reduce the effect of room
reverberation. Dereverberation requires that Audio Input Microphone [n] EchoControl Mode
is enabled.
Requires user role: ADMIN, INTEGRATOR
Default value: Off
Value space: Off/On
Off: Turn off the dereverberation.
On: Turn on the dereverberation.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
89
Administrator Guide
Device settings
Device settings
Appendices
Advertisement
Chapters
Table of Contents
