Table of Contents
Advertisement
Cisco Webex Room Panorama and Room 70 Panorama
Introduction
Factory reset the video conferencing device
If there is a severe problem with the device, the last resort may be
to reset it to its default factory settings.
It is not possible to undo a factory reset.
Always consider reverting to the previously used software
image before performing a factory reset. In many situations this
will recover the device. Read about software swapping in the
► Revert to the previously used software image
We recommend that you use the web interface or user interface
to factory reset the device. If these interfaces are not available,
use the reset pin-hole.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration
Peripherals
(page 1 of 3)
A factory reset implies:
•
Call logs are deleted.
•
Passphrases are reset to default.
•
All device parameters are reset to default values.
•
All files that have been uploaded to the device are deleted.
This includes, but is not limited to, custom wallpaper, branding
elements, certificates, and favorites lists.
•
The previous (inactive) software image is deleted.
chapter.
•
Option keys are not affected.
The device restarts automatically after the factory reset. It is using
the same software image as before.
We recommend that you back up the log files, configurations,
and custom elements of the device before you perform a
factory reset; otherwise these data will be lost.
Maintenance
Maintenance
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
75
Administrator Guide
Device settings
Appendices
Advertisement
Chapters
Table of Contents
