Table of Contents
Advertisement
Cisco Webex Room Panorama and Room 70 Panorama
Introduction
Video Input Connector [n] OptimalDefinition Profile
n: 1..6
This setting will not take effect if the corresponding Video Input Connector [n] Quality
setting is set to Sharpness.
The optimal definition profile reflects the lighting conditions in the video conferencing room
and the quality of the camera. The better lighting conditions and the better quality of the
camera, the higher the profile. Generally, the Normal or Medium profiles are recommended.
However, when the lighting conditions are very good, the High profile can be set in order to
increase the resolution for a given call rate. The resolution must be supported by both the
calling and called devices.
Use the Video Input Connector [n] OptimalDefinition Threshold60fps setting to set the
lowest resolution where 60 fps is allowed. Below this threshold 30 fps is the maximum
frame rate.
Requires user role: ADMIN, INTEGRATOR
Default value: Medium
Value space: Normal/Medium/High
Normal: Use this profile for a normally to poorly lit environment. Resolutions will be set
rather conservative.
Medium: Requires good and stable lighting conditions and a good quality video input. For
some call rates this leads to higher resolution.
High: Requires nearly optimal video conferencing lighting conditions and a good quality
video input in order to achieve a good overall experience. Rather high resolutions will be
used.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration
Peripherals
Maintenance
Video Input Connector [n] OptimalDefinition Threshold60fps
n: 1..6
For each video input, this setting tells the device the lowest resolution where it can transmit
60 fps. So for all resolutions lower than this, the maximum transmitted frame rate would be
30 fps, while above this resolution 60fps would also be possible, if the available bandwidth
is adequate.
Requires user role: ADMIN
Default value: 1920_1080
Value space: 512_288/768_448/1024_576/1280_720/1920_1080/Never
512_288: Set the threshold to 512x288.
768_448: Set the threshold to 768x448.
1024_576: Set the threshold to 1024x576.
1280_720: Set the threshold to 1280x720.
1920_1080: Set the threshold to 1920x1080.
Never: Do not set a threshold for transmitting 60fps.
Video Input Connector [n] PreferredResolution
n: 1..5
Define the preferred screen resolution and refresh rate that the video conferencing device
advertises to the input sources that are connected via HDMI (for example a laptop). The
logic for selection of the resolution on the source side will choose this resolution and
refresh rate automatically, unless it is overridden manually by the source device (for
example the laptop's display configuration software).
Note that larger formats than 1920_1080_60 use much more data, and requires a
presentation cable (or adapter) that is qualified for at least HDMI 1.4b data rates.
Requires user role: ADMIN, INTEGRATOR
Default value: 1920_1080_60
Value space: Connector 1,2: 1920_1080_60 Connector 3,4,5: 1920_1080_60/2560_1440
_60/3840_2160_30
1920_1080_60: The resolution is 1920 x 1080, and the refresh rate is 60 Hz.
2560_1440_60: The resolution is 2560 x 1440, and the refresh rate is 60 Hz.
3840_2160_30: The resolution is 3840 x 2160, and the refresh rate is 30 Hz.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
175
Administrator Guide
Device settings
Device settings
Appendices
Advertisement
Chapters
Table of Contents
