Table of Contents
Advertisement
Cisco Webex Room Panorama and Room 70 Panorama
Introduction
NetworkServices UPnP Mode
Fully disable UPnP (Universal Plug and Play), or enable UPnP for a short time period after
the video conferencing device has been switched on or restarted.
The default operation is that UPnP is enabled when you switch on or restart the video
conferencing device. Then UPnP is automatically disabled after the timeout period that is
defined in the NetworkServices UPnP Timeout setting.
When UPnP is enabled, the device advertises its presence on the network. The
advertisement permits a Touch controller to discover video conferencing devices
automatically, and you do not need to manually enter the device's IP address in order to pair
the Touch controller.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: UPnP is disabled. The video conferencing device does not advertise its presence,
and you have to enter the device's IP address manually in order to pair a Touch controller
to the device.
On: UPnP is enabled. The video conferencing device advertises its presence until the
timeout period expires.
NetworkServices UPnP Timeout
Define for how many seconds UPnP shall stay enabled after the device is switched on or
restarted. The NetworkServices UPnP Mode setting must be On for this setting to take any
effect.
Requires user role: ADMIN
Default value: 600
Value space: Integer (0..3600)
Range: Select a value between 0 and 3600 seconds.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration
Peripherals
Maintenance
NetworkServices Websocket
It is possible to interact with the API of the device over the WebSocket protocol, both the
insecure and secure versions (ws and wss). A WebSocket is tied to HTTP, so that also HTTP
or HTTPS must be enabled before you can use WebSockets (see the NetworkServices
HTTP Mode setting).
Requires user role: ADMIN
Default value: Off
Value space: FollowHTTPService/Off
FollowHTTPService: Communication over the WebSocket protocol is allowed when
HTTP or HTTPS is enabled.
Off: Communication over the WebSocket protocol is not allowed.
NetworkServices WelcomeText
Choose which information the user should see when logging on to the device through SSH.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The welcome text is: Login successful
On: The welcome text is: Welcome to <system name>; Software version; Software
release date; Login successful.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
131
Administrator Guide
Device settings
Device settings
Appendices
Advertisement
Chapters
Table of Contents
