Table of Contents
Advertisement
Cisco Webex Room Panorama and Room 70 Panorama
Introduction
NetworkServices HTTPS OCSP URL
Define the URL of the OCSP responder (server) that will be used to check the certificate
status.
Requires user role: ADMIN
Default value: ""
Value space: String (0..255)
A valid URL.
NetworkServices HTTPS Server MinimumTLSVersion
Set the lowest version of the TLS (Transport Layer Security) protocol that is allowed.
Requires user role: ADMIN
Default value: TLSv1.1
Value space: TLSv1.1/TLSv1.2
TLSv1.1: Support of TLS version 1.1 or higher.
TLSv1.2: Support of TLS version 1.2 or higher.
NetworkServices HTTPS StrictTransportSecurity
The HTTP Strict Transport Security header lets a web site inform the browser that it should
never load the site using HTTP and should automatically convert all attempts to access the
site using HTTP to HTTPS requests instead.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: The HTTP strict transport security feature is disabled.
On: The HTTP strict transport security feature is enabled.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration
Peripherals
Maintenance
NetworkServices HTTPS VerifyClientCertificate
When the video conferencing device connects to an HTTPS client (like a web browser),
the client can be asked to present a certificate to the video conferencing device to identify
itself.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: Do not verify client certificates.
On: Requires the client to present a certificate that is signed by a trusted Certificate
Authority (CA). This requires that a list of trusted CAs are uploaded to the device in
advance.
NetworkServices NTP Mode
The Network Time Protocol (NTP) is used to synchronize the device's time and date to a
reference time server. The time server will be queried regularly for time updates.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/Manual/Off
Auto: The device will use an NTP server for time reference. As default, the server
address will be obtained from the network's DHCP server. If a DHCP server is not used,
or if the DHCP server does not provide an NTP server address, the NTP server address
that is specified in the NetworkServices NTP Server [n] Address setting will be used.
Manual: The device will use the NTP server that is specified in the NetworkServices NTP
Server [n] Address setting for time reference.
Off: The device will not use an NTP server. The NetworkServices NTP Server [n] Address
setting will be ignored.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
128
Administrator Guide
Device settings
Device settings
Appendices
Advertisement
Chapters
Table of Contents
