Table of Contents
Advertisement
Cisco Webex Room Panorama and Room 70 Panorama
Introduction
Logging External Server Port
The port that the remote syslog server listens for messages on. If set to 0, the device will
use the standard syslog port. The standard syslog port is 514 for syslog, and 6514 for
syslog over TLS.
Requires user role: ADMIN
Default value: 514
Value space: Integer (0..65535)
The number of the port that the remote syslog server is using. 0 means that the device
uses the standard syslog port.
Logging External TlsVerify
This setting applies when a video conferencing device connects to a remote syslog server.
It applies to both regular logging (refer to the Logging External Mode setting) and audit
logging (refer to the Security Audit Logging Mode setting).
Before establishing a connection between the device and the syslog server, the device
checks if the certificate of the server is signed by a trusted Certificate Authority (CA). The
CA certificate must be included in the CA list on the device, either pre-installed or manually
uploaded using the web interface or API.
The minimum TLS (Transport Layer Security) version for the syslog connection is 1.1.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The device doesn't check the certificate of the syslog server.
On: The device checks if the certificate of the syslog server can be trusted. If not, the
connection between the device and the server is not established.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration
Peripherals
Maintenance
Logging Internal Mode
Specify whether or not to store the system logs on the device (local files). These are the
files that you get when you download the log bundles from the device. This setting has no
effect if the Logging Mode setting is set to Off.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: System logs will not be stored on the device.
On: System logs will be stored on the device.
Logging Mode
Define the logging mode for the device (syslog service). When disabled, the syslog service
does not start, and most of the systema and audit logs are not generated. The Historical
Logs and Call Logs are not affected.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: Disable the system logging service.
On: Enable the system logging service.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
116
Administrator Guide
Device settings
Device settings
Appendices
Advertisement
Chapters
Table of Contents
