Table of Contents
Advertisement
Cisco Webex Room Panorama and Room 70 Panorama
Introduction
Conference settings
Conference ActiveControl Mode
Active control is a feature that allows conference participants to administer a conference
on Cisco TelePresence Server or Cisco Meeting Server using the video conferencing
device's interfaces. Each user can see the participant list, change video layout, disconnect
participants, etc. from the interface. The active control feature is enabled by default,
provided that it is supported by the infrastructure (Cisco Unified Communications Manager
(CUCM) version 9.1.2 or newer, Cisco TelePresence Video Communication Server (VCS)
version X8.1 or newer, Cisco Media Server (CMS) version 2.1 or newer). Change this setting
if you want to disable the active control features.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/Off
Auto: Active control is enabled when supported by the infrastructure.
Off: Active control is disabled.
Conference AutoAnswer Mode
Define the auto answer mode. Use the Conference AutoAnswer Delay setting if you want
the device to wait a number of seconds before answering the call, and use the Conference
AutoAnswer Mute setting if you want your microphone to be muted when the call is
answered.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: You can answer incoming calls manually by tapping Answer on the Touch controller.
On: The device automatically answers incoming calls, except if you are already in a call.
You can answer or decline incoming calls manually when you are already engaged in a
call.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration
Peripherals
Maintenance
Conference AutoAnswer Mute
Define if the microphone shall be muted when an incoming call is automatically answered.
Requires that AutoAnswer Mode is switched on.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: The incoming call will not be muted.
On: The incoming call will be muted when automatically answered.
Conference AutoAnswer Delay
Define how long (in seconds) an incoming call has to wait before it is answered
automatically by the device. Requires that AutoAnswer Mode is switched on.
Requires user role: ADMIN
Default value: 0
Value space: Integer (0..50)
The auto answer delay (seconds).
Conference CallProtocolIPStack
Select if the device should enable IPv4, IPv6, or dual IP stack on the call protocol (SIP,
H323).
Requires user role: ADMIN
Default value: Dual
Value space: Dual/IPv4/IPv6
Dual: Enables both IPv4 and IPv6 for the call protocol.
IPv4: When set to IPv4, the call protocol will use IPv4.
IPv6: When set to IPv6, the call protocol will use IPv6.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
103
Administrator Guide
Device settings
Device settings
Appendices
Advertisement
Chapters
Table of Contents
