Table of Contents
Advertisement
Assembly
Hydraulic System
Checking the Hydraulic Fluid
Check the hydraulic fluid level before engine is first
started.
Fluid Type: Mobil 1 15W–50 synthetic motor oil.
IMPORTANT: Use only oil specified. Other
fluids could cause system damage.
Hydraulic System Oil Capacity: 2.1 qt. (2.0 l)
1.
Position machine on a level surface and stop the
engine and set the parking brake.
2.
Clean area around filler neck of hydraulic tank
(Fig. 8).
3.
Remove cap from filler neck and look inside to
check fluid level. Fluid level should be to the top
of baffle inside the tank (Fig. 8).
4.
If level is low, add fluid to raise level to full.
5.
Install cap on filler neck.
1
3
Figure 8
1. Cap
2. Baffle
18
2
3. Fluid level-Full
Check the Leveling of Mower
Deck
Check the level of the deck before the machine is first
put into use.
Refer to Mower Leveling section in the Maintenance
section on page 34.
Advertisement
Table of Contents
