Cisco C395 Hardware Installation Manual page 46

Hide thumbs Also See for C395:

Table of Contents

Remove and Replace a Power Supply

Warning

Step 1

Remove the power supply that you are replacing or the blank panel from an empty bay:

a) Do one of the following actions:

• If the chassis has one power supply, shut down and remove power from the chassis. See

Down, on page 35

• If the chassis has two power supplies, you do not have to shut down the chassis.

b) Remove the power cord from the power supply that you are replacing.

c) Grasp the power supply handle while pinching the release lever toward the handle.

d) Pull the power supply out of the bay.

Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide

Statement 1024 Ground Conductor

This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground

conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact

the appropriate electrical inspection authority or an electrician if you are uncertain that suitable

grounding is available.

Statement 1030 Equipment Installation

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Statement 1073 No User-Serviceable Parts

There are no serviceable parts inside. To avoid risk of electric shock, do not open.

Statement 1074 Comply with Local and National Electrical Codes

To reduce risk of electric shock or fire, installation of the equipment must comply with local and

national electrical codes.

for the procedure.

Maintenance and Upgrade

Power Button Shut

Table of Contents

C195 C695 C695f