Cisco C395 Hardware Installation Manual page 43

Hide thumbs Also See for C395:

Table of Contents

Maintenance and Upgrade

Warning

Step 1

Remove the drive that you are replacing:

a) Press the release button on the face of the drive tray.

b) Grasp and open the ejector lever and then pull the drive tray out of the slot.

Statement 1018 Supply Circuit

To reduce risk of electric shock and fire, take care when connecting units to the supply circuit so

that wiring is not overloaded.

Statement 1019 Main Disconnecting Device

The plug-socket combination must be accessible at all times, because it serves as the main

disconnecting device.

Statement 1024 Ground Conductor

This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground

conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact

the appropriate electrical inspection authority or an electrician if you are uncertain that suitable

grounding is available.

Statement 1030 Equipment Installation

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Statement 1073 No User-Serviceable Parts

There are no serviceable parts inside. To avoid risk of electric shock, do not open.

Statement 1074 Comply with Local and National Electrical Codes

To reduce risk of electric shock or fire, installation of the equipment must comply with local and

national electrical codes.

Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide

Remove and Replace a Drive

Table of Contents

C195 C695 C695f