Cisco C395 Hardware Installation Manual page 30

Hide thumbs Also See for C395:

Table of Contents

Installation Warnings

Warning

Statement 1006 Chassis Warning for Rack-Mounting and Servicing

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions

to ensure that the system remains stable. The following guidelines are provided to ensure your safety:

• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the

• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing

Warning

Statement 1015—Battery Handling

To reduce risk of fire, explosion or leakage of flammable liquid or gas:

• Replace the battery only with the same or equivalent type recommended by the manufacturer.

• Do not dismantle, crush, puncture, use sharp tool to remove, short external contacts, or dispose of

• Do not use if battery is warped or swollen.

• Do not store or use battery in a temperature > 60° C.

• Do not store or use battery in low air pressure environment < 69.7 kPa.

Warning

Statement 1017 Restricted Area

This unit is intended for installation in restricted access areas. Only skilled, instructed, or qualified

personnel can access a restricted access area.

Warning

Statement 1019 Main Disconnecting Device

The plug-socket combination must be accessible at all times, because it serves as the main disconnecting

device.

Warning

Statement 1053 Class 1M Laser Radiation

Hazard level 1M invisible laser radiation is present. Do not view directly with nonattenuating optical

instruments.

Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide

heaviest component at the bottom of the rack.

the unit in the rack.

in fire.

Installation Preparation

Table of Contents

C195 C695 C695f